This page was exported from IT Certification Exam Braindumps [ http://blog.braindumpsit.com ] Export date:Sat Apr 5 1:22:48 2025 / +0000 GMT ___________________________________________________ Title: 100% Free NCS-Core Exam Dumps to Pass Exam Easily from BraindumpsIT [Q100-Q123] --------------------------------------------------- 100% Free NCS-Core Exam Dumps to Pass Exam Easily from BraindumpsIT Free NCS-Core Exam Questions NCS-Core Actual Free Exam Questions NO.100 An organization is running a Nutanix Cluster based on AOS 5.10.x and VMware vSphere 6.7. Currently, the CVM network is segmented and Storage only nodes not present.A new security project based on NSX is coming. VMware Distributed Virtual Switches are required. The administrator needs to prepare the environment for the new project.Which step should the administrator use to initiate the project?  Enable Nutanix Flow at the Prism Central Level  Manually disable CVM network Segmentation  Convert storage only nodes into vSphere nodes  Enable Jumbo Frames to accommodate network frames NO.101 A consultant creates three storage containers (container-1, container-2, container-3). The customer requires that only container-1, which will be utilized as an NFS datastore, be presented to external hosts.However, users are able to mount all three containers.What is causing this problem?  Compression was turned on for all containers.  A Container-level whitelist entry was configured.  Deduplication was turned on for all containers.  A Global whitelist entry was configured. NO.102 A system administrator needs to shut down an AHV node in a Nutanix cluster without causing service disruption. The administrator checks data resiliency and verifies that the cluster can tolerate a node down.Which three steps should the administrator perform next? (Choose three.) Explanation1 allow vms2 sd CVM3 sd nodeNO.103 An administrator has two clusters: Site A and Site B.Async DR is configured between the clusters as follows:* Site A is the Primary Site* Site B is the Secondary inactive Site, no VMs running* Site A is fully in Production* Site B used as Backup/Disaster RecoveryThe customer wants to perform a planned failover between the sites.How should the administrator accomplish this?  Click Activate on the Secondary site within the Data Protection Dashboard  Click Activate on the Secondary site and run deactive NCLI command on Primary site  Choose Migrate on the Secondary site within the Data Protection Dashboard  Choose Migrate on the Primary sitewithin the Data Protection Dashboard ExplanationRef:https://portal.nutanix.com/page/documents/details?targetId=Web-Console-Guide-Prism-v510:wc-protection-NO.104 A customer has a Nutanix cluster with 10Gb connectivity via switch fabric extenders. The administrator receives NCC health check errors of latency greater than 200ms.Which action should the administrator take to resolve the NCC errors?  Replace the switch fabric extenders with 10G line rate switches  Upgrade NCC and increase the CVM memory by 4Gb  Add 2 additional 10G uplinks from the switch fabric extendersper node  Upgrade NCC and increase the vCPU of the CVM ExplanationRef:https://portal.nutanix.com/page/documents/details?targetId=System-Specs-G6-Single-Node:set-block-conneNO.105 An administrator configure Active Directory (AD) authentication for their Nutanix environment. When login in using an AD user account, the login process takes more than one minute to complete. No delay occurs when logging a local account.What should the administrator confirm to resolve this issue?  The user search base for the group is configuredcorrectly  The domain controller being used is configured as a global catalog server.  Active directory lookups are configured to use Non-Recursive mode.  The service Account Username is correct for the domain. NO.106 An administrator receives a notification that storage in a Nutanix cluster is unavailable. The cluster consists of five nodes and is configured with a Fault-Tolerance level of 1 (FT-1).Upon investigation, the administrator finds the following:* All AHV hosts are powered on and the CVMs are running* Nodes A, B, and C are connected to one top of rack switch* Nodes D and E are connected to a second top of rack switch* The cluster status command run on Node A shows that CVM services on nodes D and E are down Which issue is causing the storage outage?  The default gateway for the CVMs and AHV hosts is down.  The switch connecting Nodes D and E is down.  The genesis process is down on both Nodes D and E.  Nodes D and E are inmaintenance mode. https://hyperhci.com/2020/07/29/nutanix-cluster-services-down-troubleshooting/NO.107 For a new AHV cluster installation, a customer has 20 NX-8155-G6 nodes with quad port SFP NICs.The customer wants to meet the following guidelines:* Take advantage of all available 10GbE links* Achieve maximum throughput per VM* Use of redundant ToR switches* Fastest reconvergence during link failureHow should the load balancing be configured on the host?  ovs-vsctl set port br0-up bond_mode=balance-slbovs-vsctl set port br0-up other_config:bond-rebalance-interval=30000ovs-vsctl set port br0 tag=10  ovs-vsctl set port br0-up bond_mode=active-backupovs-vsctl set port br0-up other_config:bond-rebalance-interval=30000  ovs-vsctl set port br0-up bond_mode=balance-slb  ovs-vsctl set port br0-up other_config:lacp-fallback-ab=trueovs-vsctl set port br0-up lacp=activeovs-vsctl set port br0-up bond_mode=balance-tcp NO.108 The following critical Availability Alert displays in prism Central:The protection Policy PP-BCA-1HR includes a business critical application with a 1-hour snapshot frequency.What is causing this issue?  There is a scheduled outage for the Availability Zone referenced in Protection Policy PP-BCA-1HR.  Workloads included in PP-BCA-1HR are no longer within their intended RPO.  Prism Central in the Availability Zone for PP-BCA-1HR is unavailable.  NearSync replication between theAvailability Zones has fallen out of scope. NO.109 A customer with a four-node RF2 cluster is addingapplication VMs to their system. After adding these VMs, the Prism dashboard shows 81% storage utilization.What is the consequence of running the cluster at 81% storage utilization?  The customer has the ability to add more VMs up to the 100% storage utilization.  There is available capacity in the storage fabric and the cluster is resilient.  Node failure is imminent due to storage utilization.  The cluster is not resilient in the storage fabric Explanationhttps://next.nutanix.com/how-it-works-22/recommended-maximum-storage-utilization-37234NO.110 A Nutanix cluster has 10TB usable storage. The customer wants to create a 100GB datastore for ISO images to eliminate too much storage being consumed by unnecessary images.Which setting should be used to accomplish this goal?  From Container Advanced Settings, configure 100GB for advertised capacity.  From Container Advanced Settings, enable erasure coding.  From Container Advanced Settings, turn on compression and deduplication.  From Container Advanced Settings, configure 100GB for reserved capacity. NO.111 A consultant successfully installs the Foundation VM on a laptop and needs to ensure the VM can communicate externally.Which two configuration changes should the consultant make next? (Choose two.)  Ensure the vNIC is set to bridged adapter.  Configure the static IP address through the desktop virtualization software.  Open terminal and configure via ifconfig command.  Run the set_foundation_ip_address application on the VM desktop. NO.112 Asystems administrator needs to add more VMs to their Nutanix cluster.Which two actions should the administrator perform to determine if the current cluster can accommodate the new VMs? (Choose two.)  Perform an Inventory with Life Cycle Management.  Determine utilization with Cluster Runway.  Enable Deduplication and Erasure Coding.  Utilize Optimize Resources for VM efficiency. ExplanationRef:NO.113 An administrator configures authentication in Prism Central (PC) for the NTNX-Admins group. Users report that they are unable to log in. The administrator confirms that the Active Directory (AD) settings in PC are correct.Which condition could result in this behavior?  A role mapping needs to be associated with the AD group.  The users must be added to the Domain Admins AD group.  The Local authentication type must also be selected in PC.  A client chap certificate must also be added in PC. ExplanationRef:https://portal.nutanix.com/page/documents/details?targetId=Prism-Central-Guide-Prism-v5_10:mul-securityNO.114 Refer to the exhibit.User 1 and User 2 belong to the AAPM groupWhat are two descriptions of how Files perform quota management? (Choose two.)  User 2 can continue to add another 3GB file butwill receive a daily notification email.  User 1 can continue to add another 5GB file but will receive a daily notification email.  User 1 can add an 8GB file to the share without receiving notification.  User 2 can add an 8GB file without receivinga notification email. ExplanationRef:https://portal.nutanix.com/page/documents/details?targetId=Files-v3_6:fil-file-server-quotas-c.html#nconcepNO.115 A consultant is running Foundation. The cluster creation fails during the process. The host logs confirm that the nodes have been successfully imaged. The consultant decides to create the cluster manually.Which command should the consultant use?  cluster -c IP_CVM_A, IP_CVM_B, IP_CVM_n  cluster create -s IP_CVM_A, IP_CVM_B, IP_CVM_n  cluster -s IP_CVM_A, IP_CVM_B, IP_CVM_n create_manual  cluster -s IP_CVM_M, IP_CVM_B, IP_CVM_n create NO.116 A consultant creates a Nutanix cluster using the 10.10.10.0/24 network and VLAN 10. The customer creates a VM network inside the Prism using VLAN 20. The customer starts to create VMs but is unable to ping the default gateway from these new systems.What is causing the issue?  The CVM/hypervisor must be on an untagged VLAN.  The switch port is not set up as a trunk.  Only one VLAN is supported on AHV.  The CVM/hypervisor cannot use the same VLAN as guest VMs. NO.117 While creating an image placement policy on the organizations AOS 5.15-based Nutanix cluster, the administrator wants to ensure there are no restrictions on using the selected images on clusters outside of the identified set.What type of Policy Enforcement must the administrator choose?  Soft  Internal  Hard  External NO.118 A systems administrator configures a protection domain replication between two Nutanix clusters. After the first successful replication , the administrator tests DR by clicking activate on the remote cluster.While VMs are active on the remote cluster, the protection domain is marked as active on both clusters.What steps are required to return both clusters to their original state?  1. On the remote site, deactivate the Protection Domain using ncli2. On the primary site, select theProtection Domain and dick migrate  1. On the remote site, promote the Protection Domain2. On the primary site, change the Protection Domain state from Decoupled to Disabled3 Enable the original primary site as remote site  1. On the prima7 site,suspend replications2. On the remote site, deactivate the Protection Domain using ncli3. On the remote site, migrate the protection domain back to the primary site  1 On the remote site, restore the snapshots from the Protection Domain2. On the remote site, select the Protection Domain and migrate to the primary site NO.119 A consultant is using a customer’s switch for installation. Although the 10GbE ports for each of the hosts are connected to the switch, the nodes fail to be discovered.What is causing the issue?  IPv6 is not enabled on the switch.  IPMI port is not plugged in.  Foundation VM is running on a Windows host.  10GbE ports are configured with the incorrect duplex setting. NO.120 A customer is deploying Nutanix AHV clusters over hundreds of remote sites worldwide. Prism Central will be used to centrally manage all clusters. Customer security policy requires the use of MS Active Directory (AD).groups to authenticate all network devices.Which method should be consultant use to meet the requirements?  Integrate AD authentication on all CVMs.  Integrate AD authentication on Prism Central Only.  Proxy Prism Element traffic through Prism Central.  Integrate AD authentication on all Prism Element Clusters. NO.121 A new Nutanix cluster is ready for production on a remote site with no IT staff. Changes to the infrastructure will cost money and probably cause a cluster stop. The administrator needs to perform a health check on the environment that should include:* Network connectivity checks* Networkperformance status* Storage performance statusWhich tool should be used to perform this test?  X-Ray  clurator_cli  NCC  diagnostic, py NO.122 During the Knowledge Transfer, the customer askes where to find the details about their Nutanix environment, such as IP addresses, storage containers, and configuration.Where can the consultant find this information?  Support Portal  As-Built Guide  Test Plan  Tech Checklist NO.123 A consultant is performing a Nutanix Cluster installation on Dell XC Core hardware. The consultant decides to use Foundation Portable for Mac to perform the installation. When the consultant arrives onsite, Foundation Portable is unable to locate the new nodes.Which log should the consultant check to troubleshoot this issue?  /home/nutanix/foundation/log  ~/data/logs/foundation.out  foundation.app/contents/resouces/log  ~/data/logs/foundation  Loading … Latest 100% Passing Guarantee - Brilliant NCS-Core Exam Questions PDF: https://www.braindumpsit.com/NCS-Core_real-exam.html --------------------------------------------------- Images: https://blog.braindumpsit.com/wp-content/plugins/watu/loading.gif https://blog.braindumpsit.com/wp-content/plugins/watu/loading.gif --------------------------------------------------- --------------------------------------------------- Post date: 2022-07-08 16:17:43 Post date GMT: 2022-07-08 16:17:43 Post modified date: 2022-07-08 16:17:43 Post modified date GMT: 2022-07-08 16:17:43