This page was exported from IT Certification Exam Braindumps [ http://blog.braindumpsit.com ]
Export date: Sun Oct 6 14:26:38 2024 / +0000 GMT

Latest [Jul 20, 2022] Real Cisco 300-510 Exam Dumps Questions [Q27-Q51]




Latest [Jul 20, 2022] Real Cisco 300-510 Exam Dumps Questions

300-510 Dumps To Pass CCNP Service Provider Exam in One Day (Updated 101 Questions)


Official Course for Exam 300-510: Overview

The course created for 300-510 test is otherwise called ‘Implementing Cisco Service Provider Advanced Routing Solutions (SPRI) v1.0'. It is theory as well as practical based and covers the integration of advanced technologies for routing. This includes multicast routing, routing protocols, policy language, segment routing, and MPLS (Multiprotocol Label Switching). Thus, students will be able to expand their skills and awareness as concerns core networks associated with the Service Provider. Such a course as well is a way to boost your readiness for 300-510 exam. Each exam topic in this training is adequately traversed to ensure your knowledge in addition to skills are expansive and deep within the domain. By and large, there are varied ways to approach this course, including e-Learning, instructor-led classroom learning, and digital or virtual learning. The overall procedure lasts for 5 days, where candidates will be covering content through theory as well as practice since the course modes, except for e-Learning, combine practical labs and theory. Passing through instruction included in this class for 300-510 renders you with highly demanded skills for maintaining and operating advanced technologies that associate with core networks about the Service Provider. Another matter concerns enhancing your skills that are into the executing of SP core technologies. There is also the bit about gaining 40 CE credits that will go towards certificate renewal at the end of three years, which is the certification validity period.


Cisco 300-510 Exam Syllabus Topics:

TopicDetails
Topic 1
  • Mapping Of Multicast IP Addresses To MAC Addresses
  • Multiprotocol BGP For Ipv4 And Ipv6
Topic 2
  • Topology-Independent Loop-Free Alternate (TI-LFA)
  • Routing Protocol Extensions (OSPF, IS-IS, BGP)
Topic 3
  • Semantics Of Policy Applications And Statements
  • Describe Conditional Matching
Topic 4
  • Troubleshoot Route Manipulation For Igps
  • Compare Routing Policy Language And Route Maps
Topic 5
  • Any-Source Multicast (ASM) Versus Source Specific Multicast (SSM)
  • Troubleshoot Multicast Routing
Topic 6
  • Principles And Operations Of PIM-SM
  • Multicast Domains, Distribution Trees, And IGMP Operations
Topic 7
  • Describe Segment Routing V6 (Srv6)
  • MPLS And Segment Routing
  • Implement Segment Routing
Topic 8
  • Multicast Source Discovery Protocol (MSDP) Operations
  • Intra-Domain Versus Inter-Domain Multicast Routing
Topic 9
  • BGP Additional And Backup Path
  • Static Ipv6-In-Ipv4 Tunnels
  • Ipv6 Provider Edge (6PE)
Topic 10
  • Implement PIM-SM Operations
  • Describe Multicast Concepts
  • Compare Multicast Concepts

How to study the Implementing Cisco Service Provider Advanced Routing Solutions (300-510 SPRI) Exam

For the Implementing Cisco Service Provider Advanced Routing Solutions (300-510 SPRI) Exam, Cisco offers several options on their website. Cisco provides classroom training through which Cisco's authorized learning partners teach instructor-led classes all over the world. E-Learning solutions are provided by Cisco for exam preparation via self-paced online courses. Students are highly encouraged to join Cisco's Certification community where they can join students from all over the world and learn together. After taking all the official training courses, 300-510 SPRI practice exams are a must to get a proper understanding of exam format and question types. For further exam self-study materials, refer to the links down below:

Classroom Training

E-Learning

Certification Community

Practice Exams

We recommend a combination of hands-on experience, completion of the training course, and self-study in the areas described in the Exam Outline section of this exam guide as preparation for this exam.

Hover on to Cisco's Website and complete the official training course provided for the exam. Check for the topics mentioned in the Exam Outline section of this guide to review the online documentation, tip sheets, and user guides and study the details relevant to those topics. Refer to the links at the end of this document for more study material.

 

QUESTION 27
Refer to the exhibit.

The green policy is designed with low delay, and the pink policy is designed with low cost. What is the next hop for node A on its way to node D, with the objective of achieving a low delay?

 
 
 
 

QUESTION 28
Drag and Drop Question
Compare different features between OSPFv2 and OSPFv3.
Drag and drop the descriptions of OSPF from the left onto the correct OSPF versions on the right.

QUESTION 29
Refer to the exhibit. A network operator wants to expand the segment routing global block in upcoming maintenance.
The operator must ensure that the changes to the segment routing global block have no adverse impacts on the prefix-sid associated with the loopback0 interface used within the OSPF domain.
Which command can the operator use to enforce R2 to have a strict prefix-sid assignment to loopback0?

 
 
 
 

QUESTION 30
Refer to the exhibit.

Which task must you perform on interface g1/0/0 to complete the SSM implementation?

 
 
 
 

QUESTION 31
Refer to the exhibit.

A network operator must inject a Level 1 route from XR2 (10.16.16.0/24) into the ISIS topology. Which configuration allows the injection in a way that XR3 and XR1 have a valid and working route for 10.16.16.0/24?

 
 
 
 

QUESTION 32
Refer to the exhibits.

All links inside the network are configured at a default cost of one inside the fully converged OSPF domain. Given the configuration from XR1, which interface does traffic from XR1 that is destined to the loopback interface of XR6 select for the exiting interface?

 
 
 
 

QUESTION 33
Refer to the exhibit. A network operator is troubleshooting TE tunnels and discovers that the soft preemption is not working as desired.
Where should the soft preemption be applied to solve the issue?

 
 
 
 

QUESTION 34
Refer to the exhibit.

A network engineer applied configuration on R5 to summarize all OSPF routes, but R4 is still receiving specific routes from R5. The engineer has confirmed that both R5 and R4 routers are configured with correct summarization configuration but R5 Is not sending the summary routes What action must the engineer take to fix the problem?

 
 
 
 

QUESTION 35
A network engineer of an ISP using Cisco IOS XR routers wants to limit the number of prefixes that BGP peers can accept.
To accomplish this task, the command maximum- prefix 1000 is used.
Which two results of this configuration are expected? (Choose two.)

 
 
 
 
 
 
 

QUESTION 36
Refer to the exhibit.

An engineer has successfully fixed BGP peering issue. R1 has an established eBGP peering with R2 and R3. Which mechanism should the engineer apply in order to steer the traffic correctly?

 
 
 
 

QUESTION 37
For which reason can two devices fail to establish an OSPF neighbor relationship?

 
 
 
 

QUESTION 38
Which difference should be considered when intradomain or interdomain multicast routing is implemented?

 
 
 
 

QUESTION 39
Drag and Drop Question
Drag and drop the attributes for the BGP route selection on the left into the correct order on the right. Not all options are used.

QUESTION 40
Refer to the exhibit. Which tree does multicast traffic follow?

 
 
 
 

QUESTION 41
Refer to the exhibit. R3 is:
* failing to accept multicast RP information from Domain-A
* advertising MSDP SA messages to R1 and R4
* receiving SA messages only from R4
Which command must the engineer implement to resolve the issue?

 
 
 
 

QUESTION 42
A network engineer is troubleshooting OSPF multiarea. Which Cisco IOS XR feature should the engineer use in order to streamline OSPF issue?

 
 
 
 

QUESTION 43
Refer to the exhibit. XR1 and XR2 are sending the prefix 10.11.11.0/24 to XR3.
A configured policy on XR1 is incorrectly prepending AS path 11 11 12 12 onto this prefix.
A network operator wants to add a policy onto XR3 that will not allow the falsely prepending prefix from being installed.
Which policy configuration applied to the XR3 neighbor configuration for XR1 can accomplish this requirement without impact to other or future received routes?


 
 
 
 

QUESTION 44
Refer to the exhibit.

A network operator is troubleshooting TE tunnels and discovers that the soft preemption is not working as desired. Where should the soft preemption be applied to solve the issue?

 
 
 
 

QUESTION 45
Refer to the exhibit.

A network operator must stop 10.33.33.33/32 from being redistributed into Level 1 router XR1. Which configuration meets this need?



 
 
 
 

QUESTION 46
Refer to the exhibit. An engineer is troubleshooting IS-IS configuration between two areas. IS-IS Area-A network 30.1.1.0/24 is leaked into IS-IS Area-B. R2 is failing to filter the route updates from network 10.1.1.0/24. Which configuration must the engineer apply to resolve the issue?

 
 
 
 

QUESTION 47
Refer to the exhibit.

A network operator must inject a Level 1 route from XR2 (10.16.16.0/24) into the ISIS topology. Which configuration allows the injection in a way that XR3 and XR1 have a valid and working route for 10.16.16.0/24?

 
 
 
 

QUESTION 48
Refer to the exhibit.

After troubleshooting BGP traffic steering issue, which action did the network operator take to achieve the correct effect of this configuration?

 
 
 
 

QUESTION 49
Refer to the exhibit.

What is the relationship between Router 1 and Router 2?

 
 
 
 

QUESTION 50
Which two BGP mechanisms are used to prevent routing loops when using a design with redundant route reflectors? (Choose two.)

 
 
 
 
 

QUESTION 51
Refer to the exhibit.

Which task must you perform on interface g1/0/0 to complete the SSM implementation?

 
 
 
 

300-510 Exam Brain Dumps - Study Notes and Theory: https://www.braindumpsit.com/300-510_real-exam.html
Post date: 2022-07-20 09:17:02
Post date GMT: 2022-07-20 09:17:02
Post modified date: 2022-07-20 09:17:02
Post modified date GMT: 2022-07-20 09:17:02