This page was exported from IT Certification Exam Braindumps [ http://blog.braindumpsit.com ] Export date:Sun Oct 6 14:29:14 2024 / +0000 GMT ___________________________________________________ Title: Latest [Jul 20, 2022] Real Cisco 300-510 Exam Dumps Questions [Q27-Q51] --------------------------------------------------- Latest [Jul 20, 2022] Real Cisco 300-510 Exam Dumps Questions 300-510 Dumps To Pass CCNP Service Provider Exam in One Day (Updated 101 Questions) Official Course for Exam 300-510: Overview The course created for 300-510 test is otherwise called ‘Implementing Cisco Service Provider Advanced Routing Solutions (SPRI) v1.0'. It is theory as well as practical based and covers the integration of advanced technologies for routing. This includes multicast routing, routing protocols, policy language, segment routing, and MPLS (Multiprotocol Label Switching). Thus, students will be able to expand their skills and awareness as concerns core networks associated with the Service Provider. Such a course as well is a way to boost your readiness for 300-510 exam. Each exam topic in this training is adequately traversed to ensure your knowledge in addition to skills are expansive and deep within the domain. By and large, there are varied ways to approach this course, including e-Learning, instructor-led classroom learning, and digital or virtual learning. The overall procedure lasts for 5 days, where candidates will be covering content through theory as well as practice since the course modes, except for e-Learning, combine practical labs and theory. Passing through instruction included in this class for 300-510 renders you with highly demanded skills for maintaining and operating advanced technologies that associate with core networks about the Service Provider. Another matter concerns enhancing your skills that are into the executing of SP core technologies. There is also the bit about gaining 40 CE credits that will go towards certificate renewal at the end of three years, which is the certification validity period. Cisco 300-510 Exam Syllabus Topics: TopicDetailsTopic 1Mapping Of Multicast IP Addresses To MAC Addresses Multiprotocol BGP For Ipv4 And Ipv6Topic 2Topology-Independent Loop-Free Alternate (TI-LFA) Routing Protocol Extensions (OSPF, IS-IS, BGP)Topic 3Semantics Of Policy Applications And Statements Describe Conditional MatchingTopic 4Troubleshoot Route Manipulation For Igps Compare Routing Policy Language And Route MapsTopic 5Any-Source Multicast (ASM) Versus Source Specific Multicast (SSM) Troubleshoot Multicast RoutingTopic 6Principles And Operations Of PIM-SM Multicast Domains, Distribution Trees, And IGMP OperationsTopic 7Describe Segment Routing V6 (Srv6) MPLS And Segment Routing Implement Segment RoutingTopic 8Multicast Source Discovery Protocol (MSDP) Operations Intra-Domain Versus Inter-Domain Multicast RoutingTopic 9BGP Additional And Backup Path Static Ipv6-In-Ipv4 Tunnels Ipv6 Provider Edge (6PE)Topic 10Implement PIM-SM Operations Describe Multicast Concepts Compare Multicast Concepts How to study the Implementing Cisco Service Provider Advanced Routing Solutions (300-510 SPRI) Exam For the Implementing Cisco Service Provider Advanced Routing Solutions (300-510 SPRI) Exam, Cisco offers several options on their website. Cisco provides classroom training through which Cisco's authorized learning partners teach instructor-led classes all over the world. E-Learning solutions are provided by Cisco for exam preparation via self-paced online courses. Students are highly encouraged to join Cisco's Certification community where they can join students from all over the world and learn together. After taking all the official training courses, 300-510 SPRI practice exams are a must to get a proper understanding of exam format and question types. For further exam self-study materials, refer to the links down below: Classroom Training E-Learning Certification Community Practice Exams We recommend a combination of hands-on experience, completion of the training course, and self-study in the areas described in the Exam Outline section of this exam guide as preparation for this exam. Hover on to Cisco's Website and complete the official training course provided for the exam. Check for the topics mentioned in the Exam Outline section of this guide to review the online documentation, tip sheets, and user guides and study the details relevant to those topics. Refer to the links at the end of this document for more study material.   QUESTION 27Refer to the exhibit.The green policy is designed with low delay, and the pink policy is designed with low cost. What is the next hop for node A on its way to node D, with the objective of achieving a low delay?  192.168.3.2  192.168.1.6  192.168.3.6  192. 168.1.2 QUESTION 28Drag and Drop QuestionCompare different features between OSPFv2 and OSPFv3.Drag and drop the descriptions of OSPF from the left onto the correct OSPF versions on the right. QUESTION 29Refer to the exhibit. A network operator wants to expand the segment routing global block in upcoming maintenance.The operator must ensure that the changes to the segment routing global block have no adverse impacts on the prefix-sid associated with the loopback0 interface used within the OSPF domain.Which command can the operator use to enforce R2 to have a strict prefix-sid assignment to loopback0?  Option A  Option B  Option C  Option D QUESTION 30Refer to the exhibit.Which task must you perform on interface g1/0/0 to complete the SSM implementation?  configure OSPFv3  enable CDP  disable IGMP  configure IGMPv3 QUESTION 31Refer to the exhibit.A network operator must inject a Level 1 route from XR2 (10.16.16.0/24) into the ISIS topology. Which configuration allows the injection in a way that XR3 and XR1 have a valid and working route for 10.16.16.0/24?  Option A  Option B  Option C  Option D QUESTION 32Refer to the exhibits.All links inside the network are configured at a default cost of one inside the fully converged OSPF domain. Given the configuration from XR1, which interface does traffic from XR1 that is destined to the loopback interface of XR6 select for the exiting interface?  Interface GigabitElhemet 0/0. The tie breaker of the node index priority is lower and trumps the path cost.  Interface GigabitEthernet 0/1. The tie breaker of the path cost being lower. The node index priority does not impact this selection process.  Interface GigabitEthernet 0/1. The tie breaker of the node index priority is lower and trumps the path cost.  Interface GigabitEthernet 0/0. The tier breaker of the path cost being lower. The node index priority does not impact this selection process. QUESTION 33Refer to the exhibit. A network operator is troubleshooting TE tunnels and discovers that the soft preemption is not working as desired.Where should the soft preemption be applied to solve the issue?  on the tail-end device for tunnel-te1 192.168.0.7  under the tunnel-te1 interface on PE1  explicitly for tunnel-te 1 under the Cisco MPLS TE configuration mode after the timeout setting  Under the interface Loopback0 necessary for this deployment type. QUESTION 34Refer to the exhibit.A network engineer applied configuration on R5 to summarize all OSPF routes, but R4 is still receiving specific routes from R5. The engineer has confirmed that both R5 and R4 routers are configured with correct summarization configuration but R5 Is not sending the summary routes What action must the engineer take to fix the problem?  Remove summarization configuration on R5 and configure it on R4  Configure a sham link between R4 and R5 to support summarization within Area 2  Move R4 and R5 in separate areas as now they maintain the same link-state database  Clear link-state database on both R4 and R5 routers for summarization to work QUESTION 35A network engineer of an ISP using Cisco IOS XR routers wants to limit the number of prefixes that BGP peers can accept.To accomplish this task, the command maximum- prefix 1000 is used.Which two results of this configuration are expected? (Choose two.)  A warning message displays by default when 750 prefixes are received.  A warning message displays by default when 850 prefixes are received.  A BGP peer resets when it receives 1001 prefixes.  A BGP peer resets when it receives 1000 prefixes.  A BGP peer ceases when it receives 1001 prefixes.  A BGP peer ceases when it receives 1000 prefixes.  The BGP peer tries to reestablish the session after one minute. QUESTION 36Refer to the exhibit.An engineer has successfully fixed BGP peering issue. R1 has an established eBGP peering with R2 and R3. Which mechanism should the engineer apply in order to steer the traffic correctly?  The MED attribute can be applied on R2 to influence R1 to use it as the primary path.  The local preference attribute can be applied on R3 to influence AS 65513 to use AS 65515 as the secondary path.  The weight attribute can be applied on R2 to influence AS 65513 to use AS 65515 as the primary path.  The IGP metric can be manipulated on R1 to allow traffic to be load balanced between R2 and R3. Some level of load balancing is achieved by default as BGP prefers shortest AS_PATH for certain prefix (Cisco BGP path selection algorithm – rule 4) . If 1-7 rules gives no preference for certain prefix then with rule 8. Prefer lowest IGP metric to BGP next hop we can force traffic to R2 or R3 influencing load distribution.QUESTION 37For which reason can two devices fail to establish an OSPF neighbor relationship?  The two devices have different process IDs  The two devices have different network types  The two devices have different router IDs  The two devices have the same area ID QUESTION 38Which difference should be considered when intradomain or interdomain multicast routing is implemented?  Interdomain multicast routing requires an IS-IS or OSPF neighbor relationship between the domains but intradomain multicast routing requires only BGP Questions & Answers PDF P-57  Interdomain multicast routing relies on PIM-DM and intradomain multicast routing relies on PIM- SM.  interdomain multicast routing uses BIDR-PIM to establish neighbor relationships between AS and interdomain multicast routing uses MSDP  A network uses intradomain multicast routing without interdomain routing but networks that use interdomain multicast routing must also apply intradomain routing QUESTION 39Drag and Drop QuestionDrag and drop the attributes for the BGP route selection on the left into the correct order on the right. Not all options are used. Explanation:https://www.cisco.com/c/en/us/support/docs/ip/border-gateway-protocol-bgp/13753-25.htmlQUESTION 40Refer to the exhibit. Which tree does multicast traffic follow?  shared tree  MDT default  source tree  MDT voice QUESTION 41Refer to the exhibit. R3 is:* failing to accept multicast RP information from Domain-A* advertising MSDP SA messages to R1 and R4* receiving SA messages only from R4Which command must the engineer implement to resolve the issue?  R3# ip msdp sa-filter in 192.168.3.1  R3# no ip msap sa-filter in 192.168.1.1  R3# no ip msdp peer 192.168.1.1  R3# ip msdp sa-filter out 192.168.1.1 https://allthingsnetworking.wordpress.com/2014/06/27/pim-msdp-sa-filter/QUESTION 42A network engineer is troubleshooting OSPF multiarea. Which Cisco IOS XR feature should the engineer use in order to streamline OSPF issue?  hierarchical CLI  DR support for topology management  routing process enabled by default on all interfaces  show ip ospf topology command https://www.cisco.com/c/en/us/td/docs/routers/xr12000/software/xr12k_r4-0/routing/configuration/guide/rc40xr12k_chapter4.html#con_1059437QUESTION 43Refer to the exhibit. XR1 and XR2 are sending the prefix 10.11.11.0/24 to XR3.A configured policy on XR1 is incorrectly prepending AS path 11 11 12 12 onto this prefix.A network operator wants to add a policy onto XR3 that will not allow the falsely prepending prefix from being installed.Which policy configuration applied to the XR3 neighbor configuration for XR1 can accomplish this requirement without impact to other or future received routes?  Option A  Option B  Option C  Option D https://www.cisco.com/c/en/us/td/docs/routers/crs/software/crs_r4-1/routing/command/reference/b_routing_cr41crs/b_routing_cr41crs_chapter_01000.html#wp3850885229QUESTION 44Refer to the exhibit.A network operator is troubleshooting TE tunnels and discovers that the soft preemption is not working as desired. Where should the soft preemption be applied to solve the issue?  on the tail-end device for tunnel-te1 192.168.0.7  under the tunnel-te1 interface on PE1  explicitly for tunnel-te 1 under the Cisco MPLS TE configuration mode after the timeout setting  Under the interface Loopback0 necessary for this deployment type. QUESTION 45Refer to the exhibit.A network operator must stop 10.33.33.33/32 from being redistributed into Level 1 router XR1. Which configuration meets this need?  Option A  Option B  Option C  Option D QUESTION 46Refer to the exhibit. An engineer is troubleshooting IS-IS configuration between two areas. IS-IS Area-A network 30.1.1.0/24 is leaked into IS-IS Area-B. R2 is failing to filter the route updates from network 10.1.1.0/24. Which configuration must the engineer apply to resolve the issue?  R2(config)# ip prefix-list List2 seq 5 deny 10.1.1.0/24R2(config)# interface fastethernet 0/0R2(config-if)# ip router isis 100R2(config-if)# router isis 100R2(config-router)# distribute-list gateway List2 in  R2(config)# ip prefix-list List1 seq 3 deny 10.1.1.0/24R2(config)# ip prefix-list List1 seq 5 permit 30.1.1.0/24 ge 25 1eR2(config)# ip prefix-list List1 seq 10 permit 0.0.0.0/le 32R2(config)# interface fastethernet 0/0R2(config-if)# ip router isis 122R2(config-if)# router isis 122R2(config-router)# distribute-list prefix List1 in  R1(config)# ip prefix-list List2 seq 5 deny 10.1.1.0/24R1(config)# interface fastethernet 0/0R1(config-if)# ip router isis 100R1(config-if)# router isis 100R1(config-router)# distribute-list gateway List2 inR (config-if)# router isis 150R1(config-router)# distribute-list route-map Map1 in  R2(config)# access-list 101 deny ip any 10.1.1.0 0.0.0.127R2(config)# access-list 101 permit ip any 30.1.1.0 0.0.0.63R2(config)# access-list 101 deny ip any 0.0.0.0 0.0.0.0R2(config)# interface fastethernet 0/0R2(config-if)# ip router isis 121R2(config-if)# router isis 121R2(config-router)# distribute-list 101 in https://www.cisco.com/c/en/us/td/docs/ios-xml/ios/iproute_isis/configuration/15-mt/irs-15-mt- book/isis-inbound-filtering.htmlQUESTION 47Refer to the exhibit.A network operator must inject a Level 1 route from XR2 (10.16.16.0/24) into the ISIS topology. Which configuration allows the injection in a way that XR3 and XR1 have a valid and working route for 10.16.16.0/24?  Option A  Option B  Option C  Option D L1 route injected by XR2 won’t be advertised to XR1, since L2 routes are NOT leaked to L1 by default. An [L2-L1] route leak policy should be configured on L1/L2 router (XR3).QUESTION 48Refer to the exhibit.After troubleshooting BGP traffic steering issue, which action did the network operator take to achieve the correct effect of this configuration?  Routes that have passed through AS 65517 have the local preference set to 150.  Routes that have originated through AS 65517 have the local preference set to 150.  Routes directly attached to AS 65517 have the local preference set to 150.  Routes that have passed through AS 65517 have the local preference set to 150 and the traffic is denied. QUESTION 49Refer to the exhibit.What is the relationship between Router 1 and Router 2?  Router 1 centrally learns the topology of the network to aid in SR-TE path selection, and Router 2 is a node that feeds Router 1 topology information.  Router 1 and Router 2 are participating in SR-TE tunnels and are both head-end routers.  Router 1 and Router 2 centrally learn the topology of the network to aid in SR-TE path selection for peers.  Router 2 is the head-end router in an SR-TE tunnel, and it is learning topology of the network from the PCE enabled on Router 1. QUESTION 50Which two BGP mechanisms are used to prevent routing loops when using a design with redundant route reflectors? (Choose two.)  Cluster-list  AS-Path  Originator ID  Community  Origin As the iBGP learned routes are reflected, routing information may loop. The route reflector model has the following mechanisms to avoid routing loops:Originator ID is an optional, nontransitive BGP attribute. It is a 4-byte attributed created by a route reflector.The attribute carries the router ID of the originator of the route in the local autonomous system.Therefore, if a misconfiguration causes routing information to come back to the originator, the information is ignored.Cluster-list is an optional, nontransitive BGP attribute. It is a sequence of cluster IDs that the route has passed. When a route reflector reflects a route from its clients to nonclient peers, and vice versa, it appends the local cluster ID to the cluster-list. If the cluster-list is empty, a new cluster-list is created. Using this attribute, a route reflector can identify if routing information is looped back to the same cluster due to misconfiguration. If the local cluster ID is found in the cluster-list, the advertisement is ignored.QUESTION 51Refer to the exhibit.Which task must you perform on interface g1/0/0 to complete the SSM implementation?  configure OSPFv3  enable CDP  disable IGMP  configure IGMPv3  Loading … 300-510 Exam Brain Dumps - Study Notes and Theory: https://www.braindumpsit.com/300-510_real-exam.html --------------------------------------------------- Images: https://blog.braindumpsit.com/wp-content/plugins/watu/loading.gif https://blog.braindumpsit.com/wp-content/plugins/watu/loading.gif --------------------------------------------------- --------------------------------------------------- Post date: 2022-07-20 09:17:02 Post date GMT: 2022-07-20 09:17:02 Post modified date: 2022-07-20 09:17:02 Post modified date GMT: 2022-07-20 09:17:02