This page was exported from IT Certification Exam Braindumps [ http://blog.braindumpsit.com ] Export date:Sat Apr 12 17:12:17 2025 / +0000 GMT ___________________________________________________ Title: 2022 Correct and Up-to-date Juniper JN0-362 BrainDumps [Q29-Q49] --------------------------------------------------- 2022 Correct and Up-to-date Juniper JN0-362 BrainDumps Current JN0-362 dumps Preparation through Our Practice Test Certification Path JN0-362 is an fundamental course and requires no certification as a pre-requisite.   Q29. Click the Exhibit button.Referring to the exhibit, the GRE tunnel between R-1 and R-2 allows connectivity between User-1 and Server-1. When User-1 communicates with Server-2 with packets that are 1472 bytes in size, no packet fragmentation occurs. User-1 can communicate with Server-1 with packets that are up to 1448 bytes in size with no packet fragmentation. However, if the packet size is larger than 1448 bytes, packet fragmentation occurs.Why is the packet fragmentation occurring between User-1 and Server-1 in this scenario?  The GRE header adds 20 bytes to the packet  The GRE header adds 24 bytes to the packet  The IP header adds 20 bytes to the packet  The IP header adds 24 bytes to the packet Q30. Click the Exhibit button.You must create a static route on Router-A to the 10.10.5.0/24 network using 10.10.3.2 as the next hop.Referring to the exhibit, which configuration accomplishes this task?  Option A  Option B  Option C  Option D Q31. What are tree types of interfaces that can be used in an MX Series device when implementing a virtual switch routing instance? (Choose three.)  Trunk interface  Access interface  Layer 2 logical interface  GRE tunnel interface  Logical tunnel interface Q32. What happens when a packet matches a static route with the next hop parameter set to reject?  The system silently drops the packet  An ICMP message is sent to the source and the packet is forwarded  An ICMP message is sent to the source and the packet is dropped  The packet is forwarded and the packet is marked as rejected in the header Q33. Which two statements are true when configuring OSPF authentication? (Choose two.)  An OSPF link can support both simple password and MD5 authentication at the same time.  An MD5 password requires a key ID.  You can configure multiple MD5 passwords simultaneously on the same link.  If the MD5 password negotiation fails, you can configure OSPF to automatically use a simple password as a backup. Q34. You want to disable MAC learning only for interface ge-0/0/0.0 on an MX Series device.Which syntax will accomplish this task?  Option A  Option B  Option C  Option D Q35. By default, the Junos OS advertises which address(es) in LDP forwarding equivalency class (FEC) messages?  all router addresses  all transit interfaces  loopback address  primary transit interface address Q36. Click the Exhibit button.Referring to the exhibit, which two statements are true? (Choose two.)  The configuration is for an external BGP session  The local-address statement is not required for the BGP session to establish correctly  The configuration is for an internal BGP session  The local-address statement is required for the BGP session to establish correctly Q37. Click the Exhibit.Referring to the configuration in the exhibit, which statement is true?  The next-hop 172.16.1.2 must be directly connected to the router for route 192.168.5.0/24 to be active.  The next-hop 172.16.1.2 must be part of an active route in route table inet.0 for route192.168.5.0/24 to be active.  The next-hop 172.16.1.2 must respond to ping commands for the route 192.168.5.0/24 to be active.  The next-hop 172.16.1.2 must be active in route table inet.3 for the route 192.168.5.0/24 to be active. Q38. Which Layer 2 mechanism logically groups network nodes into separate broadcast domains?  IS-IS levels  OSPF areas  VLAN  IP subnets Q39. You have a stub OSPF area running in your network. Your supervisor has asked you to build a virtual link across this area to connect new equipment acquired in a recent ISP acquisition.Which statement is correct about this scenario?  Type 5 LSAs would be blocked in a stub area.  Type 5 LSAs would carry external information across your transit area to the backbone.  Type 5 LSAs would be seen only in the newly attached area.  Type 5 LSAs would be converted to type 7 LSAs. Q40. Click the Exhibit button.Which type of route is shown in the exhibit?  generate  static  kernel  aggregate Q41. You are asked to change the default TTL handling behavior on your Junos device to ensure that the RSVP- signaled LSPs in your MPLS network cannot be mapped.Which configuration should be performed to accomplish this task?  Configure the no-decrement-ttl parameter for each LSP on the ingress device  Configure the no-propagate-ttl parameter for each LSP on the egress device  Configure the no-propagate-ttl parameter for each LSP on the ingress device  Configure the no-decrement-ttl parameter for each LSP on the egress device Q42. You have been asked to use a convention that allows for auto configuration of interface addresses.You are not allowed to use DHCPv6. What do you do?  Use IPv4 with the autoconfig option under family inet.  Use IPv6 in the network to configure hosts.  Use a program (e.g. Vector-Wiz) to auto configure IP addresses.  Use an IPv6 static configuration. Q43. Click the Exhibit.Referring to the exhibit, which IS-IS router will be selected as the DIS?  Router 1  Router 4  Router 2  Router 3 Q44. Click the Exhibit button.Referring to the exhibit what are two reasons for the configuration stanza? (Choose two.)  to reduce the risk of forwarding traffic through a stateless tunnel  to mark the tunnel down after the hold-time expires  to remove the tunnel interface from inet.0 after the hold-time expires  to mark the tunnel up after the hold-time expires Q45. What are three ways to configure IPv6 addresses in your network? (Choose three.)  Statically configure your IPv6 addresses.  Configure your IPv6 addresses using stateless auto configuration.  Configure your IPv6 addresses by setting up a DHCPv6 server.  Configure your IPv6 addresses by assigning your router a prefix list.  Configure your IPv6 addresses by configuring support for unicast-arp-negotiation. Q46. Click the Exhibit button. Which two topologies shown in the exhibit could be implemented without a spanning-tree protocol? (Choose two.)  ring  tree  star  mesh Q47. Which two configuration elements must match on all switches participating in the same MSTP region? (Choose two.)  mstp-version  configuration-name  msti-revision  revision-level Q48. Click the Exhibit button.You have applied the policy shown in the exhibit to the forwarding table on an MX Series device. How is traffic load-balanced?  per frame  per packet  per segment  per flow Q49. Which statement correctly describes a characteristic of IPv6 unicast addressing?  Global addresses are in the range of 2002::/16.  Only one loopback address exists, ::1/128.  Link-local addresses are in the range of FF00::/8.  Link-local addresses are in the range of FE00::/12.  Loading … JN0-362 Exam topics Candidates must know the topics before they start of preparation because it will really help them solving the problems. Our JN0-362 practice test and CAU-305 practice exams will include the following topics. These are covered in our JN0-362 exam dumps.   100% Reliable Microsoft JN0-362 Exam Dumps Test Pdf Exam Material: https://www.braindumpsit.com/JN0-362_real-exam.html --------------------------------------------------- Images: https://blog.braindumpsit.com/wp-content/plugins/watu/loading.gif https://blog.braindumpsit.com/wp-content/plugins/watu/loading.gif --------------------------------------------------- --------------------------------------------------- Post date: 2022-09-26 15:44:56 Post date GMT: 2022-09-26 15:44:56 Post modified date: 2022-09-26 15:44:56 Post modified date GMT: 2022-09-26 15:44:56