300-510, Cisco, , , , , ,
Rate this post

300-510 Dumps for Pass Guaranteed – Pass 300-510 Exam 2022

300-510 Exam Dumps – Try Best 300-510 Exam Questions from Training Expert BraindumpsIT

Prerequisites for Final Exam

The individuals concerned will already have awareness and skills involving how to execute and operate Cisco core technologies for the networks that are targeted at the Service Providers. They should also have a deep comprehension of the 300-510 subject matter so gaining the requisite knowledge takes deliberate learning that makes use of recommended courses as well as revision or study guides. Potential candidates should also be aware of the registration process for the official test. Thus, they should have a Pearson VUE account before they can do the final registration, which includes selecting the number of the evaluation they intend to do.

Cisco 300-510 Exam Topics:

Section Weight Objectives
Multicast Routing 15% – Compare multicast concepts

  • Multicast domains, distribution trees, and IGMP operations
  • Any-Source Multicast (ASM) versus Source Specific Multicast (SSM)
  • Intra-domain versus inter-domain multicast routing

– Describe multicast concepts

  • Mapping of multicast IP addresses to MAC addresses
  • Multiprotocol BGP for IPv4 and IPv6
  • Principles and operations of PIM-SM
  • Multicast Source Discovery Protocol (MSDP) operations
  • MLDP/P2MP

– Implement PIM-SM operations

  • Auto-RP, PIMv2 BSR, anycast RP
  • BIDIR-PIM operations
  • SSM operations
  • MSDP operations

– Troubleshoot multicast routing

  • Single domain
  • Multidomain
Unicast Routing 35% – Compare OSPF and IS-IS routing protocols
– Troubleshoot OSPF multiarea operations (IPv4 and IPv6)

  • Route advertisement
  • Summarization

– Troubleshoot IS-IS multilevel operations (IPv4 and IPv6)

  • Route advertisement
  • Summarization

– Describe the BGP scalability and performance

  • BGP confederations
  • Route reflectors

– Troubleshoot BGP

  • Route advertisement
  • Route reflectors
  • Confederations
  • Multihoming
  • TTL security and inter-domain security
  • Maximum prefix
  • Route dampening
  • Dynamic neighbors
  • Communities

– Describe IPv6 tunneling mechanisms

  • Static IPv6-in-IPv4 tunnels
  • Dynamic 6to4 tunnels
  • IPv6 provider edge (6PE)

– Implement fast convergence

  • Bidirectional forwarding detection
  • Nonstop Forwarding
  • NSR
  • Timers
  • BGP pic (edge and core)
  • LFA
  • BGP additional and backup path
Routing Policy and Manipulation 25% – Compare routing policy language and route maps
– Describe conditional matching

  • Operations
  • Semantics of policy applications and statements
  • Regular expressions
  • Policy sets
  • Tags
  • ACLs
  • Prefix lists and prefix sets
  • Route types
  • BGP attributes and communities
  • Hierarchical and parameterized structures

– Troubleshoot route manipulation for IGPs

  • IS-IS
  • OSPF

– Troubleshoot route manipulation for BGP

  • Route filtering
  • Traffic steering
MPLS and Segment Routing 25% – Troubleshoot MPLS

  • LDP
  • LSP
  • Unified BGP
  • BGP free core
  • RSVP TE tunnels

– Implement segment routing

  • Routing protocol extensions (OSPF, IS-IS, BGP)
  • SRGB and SRLB
  • Topology-Independent Loop-Free Alternate (TI-LFA)
  • Migration procedures (SR prefer and mapping server)

– Describe segment routing traffic engineering

  • Automated steering and coloring
  • Policies (constraints, metrics, and attributes)
  • PCE-based path calculation

– Describe segment routing v6 (SRv6)

  • Control plane operations
  • Data plane operations

 

NEW QUESTION 21
What is the purpose of ACL type prefix set entries in RPL prefix sets?

 
 
 
 

NEW QUESTION 22
An ISP has an MPLS VPN-based network with 12 PE routers. How many peerings are required between the 12 routers if the engineer has not configured route reflectors?

 
 
 
 

NEW QUESTION 23
A network engineer is troubleshooting OSPF multiare A.
Which Cisco IOS XR feature should the engineer use in order to streamline OSPF issue?

 
 
 
 

NEW QUESTION 24
Which two statements about mapping multicast IP addresses to MAC addresses are true?
(Choose two.)

 
 
 
 
 

NEW QUESTION 25
Which difference must an engineer consider when choosing whether to implement OSPF or IS-IS as the routing protocol on the network?

 
 
 
 

NEW QUESTION 26
Refer to the exhibit.

After you applied these configurations to routers R1 and R2, the two devices could not form a neighbor relationship. Which reason for the problem is the most likely?

 
 
 
 

NEW QUESTION 27
Refer to the exhibits.

All links inside the network are configured at a default cost of one inside the fully converged OSPF domain. Given the configuration from XR1, which interface does traffic from XR1 that is destined to the loopback interface of XR6 select for the exiting interface?

 
 
 
 

NEW QUESTION 28
Refer to the exhibit.

A network engineer implemented this segment routing configuration. Which statement about the output is true?

 
 
 
 

NEW QUESTION 29
What is a requirement of PIM-SM?

 
 
 
 

NEW QUESTION 30
Refer to the exhibit.

A network operator is working to deploy a Unified BGP design and allow it to be available only in selected markets and services in the future. The label allocation is not functioning as desired. Which action will fix the issue?

 
 
 
 

NEW QUESTION 31
Refer to the exhibit.

A network operator is troubleshooting TE tunnels and discovers that the soft preemption is not working as desired. Where should the soft preemption be applied to solve the issue?

 
 
 
 

NEW QUESTION 32
Refer to the exhibit. Which LSA type is indicated by this router output?

 
 
 
 

NEW QUESTION 33
Which type of BGP attribute does a route reflector attach to routes learned from iBGP peers that allows them to be accepted by other iBGP peers, thereby eliminating the need for a full-mesh BGP topology?

 
 
 
 

NEW QUESTION 34
Refer to the exhibit. An engineer is troubleshooting an OSPF issue.
Router 1 has a neighbor relationship with router 2.
Only router 1 classful EIGRP routes can be seen on router 2.
In order for all EIGRP routes to be redistributed correctly, which action should be taken?

 
 
 
 

NEW QUESTION 35
Refer to the exhibit.

Refer to the exhibit Networks 172.16.31.0/24 and 172 16 30.0/24 are advertised in area 34. and network 172.22 10.0/24 is advertised in area 0. A recent security review discovered that users connected to routers R1 and R2 have been making unauthorized access to an application running on network 172 16 31 0/24 An engineer determined that routers R1 and R2 are receiving updates for network 17 16 31 0/24 Which action resolves the issue?

 
 
 
 

NEW QUESTION 36
Refer to the exhibit.

Router 1 has established an SR-TE tunnel with router 2. Which statement describes this configuration?

 
 
 
 

Latest 100% Passing Guarantee – Brilliant 300-510 Exam Questions PDF: https://www.braindumpsit.com/300-510_real-exam.html

         

Leave a comment

Your email address will not be published. Required fields are marked *

Enter the text from the image below