IT Certification Exam Braindumps
https://blog.braindumpsit.com/2023/02/12/100-pass-guaranteed-accurate-ns0-520-answers-365-days-free-updates-q124-q148/
Export date: Sun Oct 6 10:33:58 2024 / +0000 GMT

100% Pass Guaranteed Accurate NS0-520 Answers 365 Days Free Updates [Q124-Q148]




100% Pass Guaranteed Accurate NS0-520 Answers 365 Days Free Updates

NS0-520 DUMPS Q&As with Explanations Verified & Correct Answers


The difficulties that you can face while writing the Network Appliance NS0-520 Certification Exam

There are several difficulties that a candidate can face while writing the Network Appliance NS0-520 Certification Exam. These difficulties are discussed here. There is a huge number of questions in the Network Appliance NS0-520 Certification Exam. It is very difficult to prepare for all the questions that are asked in the exam. Moreover, the questions asked in the exam are quite challenging. You have to make sure that you are well-versed with the concepts that are discussed in the Network Appliance NS0-520 Certification Exam. Disables space reclamation for files and data blocks, which are required for high-availability clusters.

The time given to take the NS0-520 Certification Exam is very limited. You should make sure that you do not waste the time that is given to you. It is very important to use the time that is given to you to the fullest. Moreover, you should try to make the most out of the time that is given to you, to prep NS0-520 exam. It is important to prepare yourself for the NS0-520 exam. Fabric single and supports multiple protocols including iSCSI, node cluster, Fibre Channel, and FCoE. Receive an error message, which is displayed when the host is unable to boot from the CD-ROM. You should make sure that you are well-versed with the concepts that are discussed in the exam like switches.

Unavailability or lack of awareness about the resources that are required to prepare for the Network Appliance NS0-520 Certification Exam is one of the most common difficulties that are faced by candidates. Unavailable after failover, this failure mode can occur in the Network Appliance NS0-520 Certification Exam. You can also get help of the braindumps of the NS0-520 exam. It is important to make sure that you make the most out of the resources that are provided to you. NS0-520 exam dumps will help you in this regard.

 

NO.124 You want to perform online data migration using Foreign LUN Import. In this scenario, which two conditions are required to support this task? (choose two)

 
 
 
 

NO.125 A customer that is using an AFF A220 has a problem with a host for a new FC LUN. Other LUNs on the same SVM are working properly. This LUN is not visible on the host.
Which configuration does the customer need to verify in their solution?

 
 
 
 

NO.126 You are asked to serve iSCSI LUNs in an existing SVM on your AFF A220 using ONTAP 9.5. You verified that the iSCSI license is configured on your cluster and that the iSCSI protocol is enabled.
Referring to the exhibit, what is needed to allow hosts to log into the iSCSI target?

 
 
 
 

NO.127 Click the Exhibit button.

Referring to the exhibit, which container obtains space savings from deduplication, compression, and compaction?

 
 
 
 

NO.128 Exhibit.

You are adding a boot LUN for a new server. The server uses FCP attached through a CNA.
The ONTAP cluster is also attached to the same fabric by way of UTA2. You configure the zoning for the fabric as shown in the exhibit. You discover that the server cannot see its boot LUN.
What is the problem with your zoning configuration?

 
 
 
 

NO.129 Click the Exhibit button.

You are implementing an ONTAP 9.5 AFF A300 SAN cluster with the NVMe, FC, and FCoE protocols. Referring to the exhibit, which three protocols and physical port pairs are supported? (Choose three.)

 
 
 
 
 

NO.130 A customer experiences intermittent connectivity problems between an ESXi server and FC LUNs in an SVM. The customer has examined the nodes hosting the LUNs and both the disk and CPU performance are below 50% utilization. The customer examined the switch ports connected to the storage array, and they ate also below 50% utilization.
Which two steps would you perform next in this scenario? (Choose two.)

 
 
 
 

NO.131 A customer needs to change ports 0e and 0f on AFF_1 to support FC.
Referring to the exhibit, which three steps are required to accomplish this task? (Choose three.)

 
 
 
 
 

NO.132 While changing the network connections on your ONTAP cluster from twinax to fiber, the ports experience network connectivity issues. You want to verify which speeds the ports support and ensure that you have supported transceivers. In this scenario which two actions would accomplish this task (choose two)

 
 
 
 

NO.133 You have inherited a small FC SN infrastructure that consists of 15 servers (hosts), two Cisco MDS 9148s switches, and a 4-node NetApp AFF A300 cluster. You suspect that your predecessor did not configure zoning according to best practices.
In this scenario, what information is necessary to audit your SAN zoning? (Choose two.)

 
 
 
 

NO.134 You install an ASA AFF A400 system with 32 GB FC SFP+ modules in port 0e and 0f. After creating the SVM and configuring the FCP protocol, the physical port stays offline. Referring to the exhibit which statement is correct?

 
 
 
 

NO.135 Which option needs to be set on a LUN to guarantee that it cannot be affected by other LUNs in the volume?

 
 
 
 

NO.136 Exhibit.

You are moving volumes between aggregate aft_01_aggr1 and the aggregate Aggr_Data shown in the exhibit.
How much space will be moved?

 
 
 
 

NO.137 You have a 4-node cluster with an AFF A300 HA pair and a FAS8200 HA pair. You plan on using the default storage efficiency settings. With inline data compaction, you estimate that you can save 6% of storage space. AFF A300 volumes that use under 5000 IOPS are moved to a FAS8200 using the volume move command.
In this scenario, what happens to the data after the volume is moved? (Choose two.)

 
 
 
 

NO.138 You have a thin-provisioned LUN that was created by using the lun create -vserver vs1 – path /vol/vol1/lun1 -size 500G -ostype windows 2008 -space-reserve disabled -space-allocation disabled command. You verify that your Windows 2016 host reports 200 GB free on lun1. However, lun1 shows 0 bytes free on the storage cluster.
What should you do to solve this problem?

 
 
 
 

NO.139 Click the Exhibit button.

You notice that your volume named vol1 has a temporary volume that is doubling the space that is used by the volume.
In this scenario, which operation caused the volume to take up twice the space?

 
 
 
 

NO.140 You have a two node Netapp ONTAP cluster that is hosting FC LUNs for 90 SAN hosts. The hosts are experiencing occasional performance problems and receiving QFULL responses from the cluster nodes. Which action would solve this issue?

 
 
 
 

NO.141 Which protocol provides multipathing and path management for both path and target failover for NVMe over Fibre Channel (NVMe/FC)?

 
 
 
 

NO.142 Which four FC fabric topologies does NetApp support? (Choose four.)

 
 
 
 
 
 
 

NO.143 You have a 4-node AFF A400 cluster serving iSCSI and FC LUNs. You are asked to tier Snapshot copy data from the SSDs to both Azure Blob storage and Amazon S3. The two sets of Snapshot copies must be managed by ONTAP software so that they are accessible for cloning and replication.
In this scenario, which NetApp technology accomplishes this task?

 
 
 
 

NO.144 An administrator is planning to rehost a SAN volume from one SVM to another SVM on a FAS8300 with all hard disk drives.
After rehosting the volume, what are two policies that must be reconfigured? (Choose two.)

 
 
 
 

NO.145 When setting up a VLAN for administrative security purposes, which four ports are the only important ports to include in the VLAN? (Choose four.)

 
 
 
 
 
 

NO.146 Exhibit.

The host in the exhibit is connected to a 4-node ONTAP SAN using dual-fabric implementation. LUNs have been mapped LUN through all available UFs on nil (our nodes. Switch 2 is powered off for high-availability testing.
How many paths per LUN would you expect the host to see in this scenario?

 
 
 
 

NO.147 You need to move a LUN non-disruptively from an AFF A200 HA pair to an AFF A700 HA pair within the same 4-node cluster using the steps shown below.
1. Scan the host OS to discover all paths to the LUN.
2. Execute the lun move command to move the LUN to the AFF A/00 HA pair.
3. Remove the AFF A200 HA pair from the reporting-nodes list.
4. Add the AFF A700 HA pair to the reporting-nodes list.
What is the correct sequence in performing, these steps?

 
 
 
 

NO.148 Exhibit.

Referring to the exhibit, what is the total amount of space that is guaranteed for the LUNs in the /vo1/vo1_sanlunsiprod_03 volume?

 
 
 
 


Hit the link below, for getting more info about the Network Appliance NS0-520 Certification Exam

Official link to the NS0-520 Exam


The most reliable way to get ready for the Network Appliance NS0-520 Certification Exam

Getting ready for the Network Appliance NS0-520 Certification Exam is not a difficult task. To accomplish this, you just need to make sure that you follow the instructions given here. First and foremost is to make a well-structured study plan. The study plan should be specific and should include all the topics that are discussed in the Network Appliance NS0-520 Certification Exam. The study plan should also include the exam objectives that are mentioned in the Network Appliance NS0-520 Certification Exam. The study plan should also include the methods and techniques that are required to prepare for the Network Appliance NS0-520 Certification Exam. NS0-520 exam dumps are available for all the methods and techniques that are mentioned in the study plan.

It is important to make sure that you follow the study plan that you have made. If you do not follow the study plan that you have made, then it is very likely that you will not be able to prepare for the Network Appliance NS0-520 Certification Exam. You should also make sure that you follow the latest updates in the field of networking and storage. It is important to study for the Network Appliance NS0-520 Certification Exam at least one month before the actual date of the exam. It is recommended that you prepare for the Network Appliance NS0-520 Certification Exam at least two months before the date of the exam.

After that, it is very important to follow the methods and techniques that are discussed in the Network Appliance NS0-520 Certification Exam. You should try to understand the concepts and the solutions that are discussed in the Network Appliance NS0-520 Certification Exam. You should also try to solve the questions that are asked in the Network Appliance NS0-520 Certification Exam. Moreover, you should try to solve the questions that are similar to the questions that are asked in the Network Appliance NS0-520 Certification Exam. You should start preparing for the Network Appliance NS0-520 Certification Exam by practicing a lot. It is recommended that you practice as many mock tests as possible.

 

NS0-520 dumps Exam Material with 236 Questions: https://www.braindumpsit.com/NS0-520_real-exam.html 1
Links:
  1. https://www.braindumpsit.com/NS0-520_real-exam.htm l
Post date: 2023-02-12 09:57:03
Post date GMT: 2023-02-12 09:57:03

Post modified date: 2023-02-12 09:57:03
Post modified date GMT: 2023-02-12 09:57:03

Export date: Sun Oct 6 10:33:58 2024 / +0000 GMT
This page was exported from IT Certification Exam Braindumps [ http://blog.braindumpsit.com ]