This page was exported from IT Certification Exam Braindumps [ http://blog.braindumpsit.com ] Export date:Sun Oct 6 10:27:05 2024 / +0000 GMT ___________________________________________________ Title: 100% Pass Guaranteed Accurate NS0-520 Answers 365 Days Free Updates [Q124-Q148] --------------------------------------------------- 100% Pass Guaranteed Accurate NS0-520 Answers 365 Days Free Updates NS0-520 DUMPS Q&As with Explanations Verified & Correct Answers The difficulties that you can face while writing the Network Appliance NS0-520 Certification Exam There are several difficulties that a candidate can face while writing the Network Appliance NS0-520 Certification Exam. These difficulties are discussed here. There is a huge number of questions in the Network Appliance NS0-520 Certification Exam. It is very difficult to prepare for all the questions that are asked in the exam. Moreover, the questions asked in the exam are quite challenging. You have to make sure that you are well-versed with the concepts that are discussed in the Network Appliance NS0-520 Certification Exam. Disables space reclamation for files and data blocks, which are required for high-availability clusters. The time given to take the NS0-520 Certification Exam is very limited. You should make sure that you do not waste the time that is given to you. It is very important to use the time that is given to you to the fullest. Moreover, you should try to make the most out of the time that is given to you, to prep NS0-520 exam. It is important to prepare yourself for the NS0-520 exam. Fabric single and supports multiple protocols including iSCSI, node cluster, Fibre Channel, and FCoE. Receive an error message, which is displayed when the host is unable to boot from the CD-ROM. You should make sure that you are well-versed with the concepts that are discussed in the exam like switches. Unavailability or lack of awareness about the resources that are required to prepare for the Network Appliance NS0-520 Certification Exam is one of the most common difficulties that are faced by candidates. Unavailable after failover, this failure mode can occur in the Network Appliance NS0-520 Certification Exam. You can also get help of the braindumps of the NS0-520 exam. It is important to make sure that you make the most out of the resources that are provided to you. NS0-520 exam dumps will help you in this regard.   NO.124 You want to perform online data migration using Foreign LUN Import. In this scenario, which two conditions are required to support this task? (choose two)  ISCSI protocol LIFs must be added to the data SVM  ISCSI targets must be added to the ONTAP ISCSI initiator  FCP protocol LIFs must be added to the data SVM  FCP initiator ports must be available FLI does not support iSCSI connections directly. In order for iSCSI LUNs to be migrated using FLI, the LUN type must be changed to FC. After the migration is complete, the LUN type is changed back to iSCSI.You can find more information on this link:https://docs.netapp.com/us-en/ontap-fli/san-migration/concept_lun_requirements_and_limitations.htmlNO.125 A customer that is using an AFF A220 has a problem with a host for a new FC LUN. Other LUNs on the same SVM are working properly. This LUN is not visible on the host.Which configuration does the customer need to verify in their solution?  LUN mapping with igroup  host HBA speed settings  FC target port setting on NetApp node  FC switch zoning NO.126 You are asked to serve iSCSI LUNs in an existing SVM on your AFF A220 using ONTAP 9.5. You verified that the iSCSI license is configured on your cluster and that the iSCSI protocol is enabled.Referring to the exhibit, what is needed to allow hosts to log into the iSCSI target?  Create new LIFs with the iSCSI data protocol.  Create new igroups with the host IQNs.  Add iSCSI to the data protocol of the existing LIFs.  Map LUNs to the igroups. NO.127 Click the Exhibit button.Referring to the exhibit, which container obtains space savings from deduplication, compression, and compaction?  the aggregate  the LUN  the qtree  the volume NO.128 Exhibit.You are adding a boot LUN for a new server. The server uses FCP attached through a CNA.The ONTAP cluster is also attached to the same fabric by way of UTA2. You configure the zoning for the fabric as shown in the exhibit. You discover that the server cannot see its boot LUN.What is the problem with your zoning configuration?  The zone set must have the same name as the zone.  The zone was not activated.  The zone used a wrong zone ID.  The WWPN for the NetApp LIF is incorrect. NO.129 Click the Exhibit button.You are implementing an ONTAP 9.5 AFF A300 SAN cluster with the NVMe, FC, and FCoE protocols. Referring to the exhibit, which three protocols and physical port pairs are supported? (Choose three.)  NVMe on ports 2a/2b  FC on ports 2a/2b  NVMe on ports 0e/0f  FCoE on ports 0e/0f  FC on ports 0e/0f NO.130 A customer experiences intermittent connectivity problems between an ESXi server and FC LUNs in an SVM. The customer has examined the nodes hosting the LUNs and both the disk and CPU performance are below 50% utilization. The customer examined the switch ports connected to the storage array, and they ate also below 50% utilization.Which two steps would you perform next in this scenario? (Choose two.)  Verify that the host is using SnapDrive.  Verify that the host Ethernet interfaces are using jumbo frames.  Verify that the host recommended settings were applied by Virtual Storage Console.  Verify that the HBA queue depth is set properly. NO.131 A customer needs to change ports 0e and 0f on AFF_1 to support FC.Referring to the exhibit, which three steps are required to accomplish this task? (Choose three.)  Issue the ucadmin modify -node AFF_1 -adapter 0e -mode FC -type target command.  Issue the ucadmin modify -node AFF_1 -adapter 0e -mode FC -type initiator command.  Restart the FC service.  Take ports 0e and 0f offline.  Reboot the node. NO.132 While changing the network connections on your ONTAP cluster from twinax to fiber, the ports experience network connectivity issues. You want to verify which speeds the ports support and ensure that you have supported transceivers. In this scenario which two actions would accomplish this task (choose two)  Use hardware universe to determine the supported transceivers  Use the interoperability matrix tool to determine the supported port speeds  Use hardware universe to determine the supported port speeds  Use the interoperability matrix tool to determine the supported transceivers Hardware universe will show information about port speeds and transceiver compatbility You can find more information on this link:https://hwu.netapp.com/Resources/hwu_ug.pdf (page 73)NO.133 You have inherited a small FC SN infrastructure that consists of 15 servers (hosts), two Cisco MDS 9148s switches, and a 4-node NetApp AFF A300 cluster. You suspect that your predecessor did not configure zoning according to best practices.In this scenario, what information is necessary to audit your SAN zoning? (Choose two.)  SVM WWNNs  SVN LIF WWPNs  Controller port WWPNs  Host GBA WWPNs NO.134 You install an ASA AFF A400 system with 32 GB FC SFP+ modules in port 0e and 0f. After creating the SVM and configuring the FCP protocol, the physical port stays offline. Referring to the exhibit which statement is correct?  The current type of the ports must be configured as an initiator  The current mode to the ports must be configured as an FC port  The current mode for the ports must be set as an NVMe/FC port  The admin status is manually set to down Before using your UTA ports on a FC infraestructure, you need to modify the current mode from CNA to FC. You need to set the ports offline before you modify that parameter.You can find more information on this link:http://docs.netapp.com/ontap-9/index.jsp?topic=%2Fcom.netapp.doc.dot-cm-sanag%2FGUID-E2CD31BE-28EC-468E-AF49-83A641575799.htmlNO.135 Which option needs to be set on a LUN to guarantee that it cannot be affected by other LUNs in the volume?  Volume Guarantee  Volume Space Reserved  LUN Reservation Disabled  LUN Reservation Enabled NO.136 Exhibit.You are moving volumes between aggregate aft_01_aggr1 and the aggregate Aggr_Data shown in the exhibit.How much space will be moved?  11.17 TB  935.75 GB  296 KB  1. 91 TB NO.137 You have a 4-node cluster with an AFF A300 HA pair and a FAS8200 HA pair. You plan on using the default storage efficiency settings. With inline data compaction, you estimate that you can save 6% of storage space. AFF A300 volumes that use under 5000 IOPS are moved to a FAS8200 using the volume move command.In this scenario, what happens to the data after the volume is moved? (Choose two.)  The new written data is not compacted.  The existing data is compacted.  The new written data is compacted.  The existing data is not compacted. NO.138 You have a thin-provisioned LUN that was created by using the lun create -vserver vs1 – path /vol/vol1/lun1 -size 500G -ostype windows 2008 -space-reserve disabled -space-allocation disabled command. You verify that your Windows 2016 host reports 200 GB free on lun1. However, lun1 shows 0 bytes free on the storage cluster.What should you do to solve this problem?  Change the LUN -space-allocation parameter to enabled.  Change the LUN -ostype parameter to windows_gpt.  Change the LUN -space-reserve parameter to enabled.  Rescan the LUN disk in your Windows host so that it will notify NetApp about the free space. NO.139 Click the Exhibit button.You notice that your volume named vol1 has a temporary volume that is doubling the space that is used by the volume.In this scenario, which operation caused the volume to take up twice the space?  FlexClone  SnapRestore  FlexGroup  SnapMirror NO.140 You have a two node Netapp ONTAP cluster that is hosting FC LUNs for 90 SAN hosts. The hosts are experiencing occasional performance problems and receiving QFULL responses from the cluster nodes. Which action would solve this issue?  Increase the queue depth on the target ports  Configure additional FC target ports  Increase the queue depth on the initiator ports  Configure additional FC ports on the hosts Adding more FC initiators on host will not solve this bottle-neck situation, we can try to increase the queue depth but we need the number of hosts and the number of target ports to calculate it correctly.We need to add more FC target ports on our storage to keep the load balanced and distributed You can find more information on this linkhttps://docs.netapp.com/ontap-9/index.jsp?topic=%2Fcom.netapp.doc.dot-cm-sanconf%2FGUID-A055B184-0876-4376-9C75-35FE8C9BE832.htmlNO.141 Which protocol provides multipathing and path management for both path and target failover for NVMe over Fibre Channel (NVMe/FC)?  Asynchronous Namespace Access (ANA)  N_Port ID virtualization (NPIV)  Asymmetric Logical Unit Access (ALUA)  NVMe namespaces NO.142 Which four FC fabric topologies does NetApp support? (Choose four.)  four FC switches with multiple Inter-Switch Links (ISLs) between each pair of switches  ten FC switches per fabric, daisy chained with a single ISL between switches  four FC switches with multiple ISLs between ALL switches  eight FC switches with no more than a single ISL between switches in a cascade topology  dual FC switches with no ISLs  a single FC switch  a switched fabric that has 65537 ports NO.143 You have a 4-node AFF A400 cluster serving iSCSI and FC LUNs. You are asked to tier Snapshot copy data from the SSDs to both Azure Blob storage and Amazon S3. The two sets of Snapshot copies must be managed by ONTAP software so that they are accessible for cloning and replication.In this scenario, which NetApp technology accomplishes this task?  Flash Pool  Fabric Pool  MetroCluster  Cloud Sync NO.144 An administrator is planning to rehost a SAN volume from one SVM to another SVM on a FAS8300 with all hard disk drives.After rehosting the volume, what are two policies that must be reconfigured? (Choose two.)  export policy  caching policy  volume efficiency policy  snapshot policy NO.145 When setting up a VLAN for administrative security purposes, which four ports are the only important ports to include in the VLAN? (Choose four.)  Storage Controllers Management Ethernet ports  FC Switches Ethernet port  Hosts iSCSI HBA Ethernet port  Ethernet Switches Management port  Storage Controller iSCSI Ethernet Target ports  Hosts NIC Ethernet port NO.146 Exhibit.The host in the exhibit is connected to a 4-node ONTAP SAN using dual-fabric implementation. LUNs have been mapped LUN through all available UFs on nil (our nodes. Switch 2 is powered off for high-availability testing.How many paths per LUN would you expect the host to see in this scenario?  2  6  4  8 NO.147 You need to move a LUN non-disruptively from an AFF A200 HA pair to an AFF A700 HA pair within the same 4-node cluster using the steps shown below.1. Scan the host OS to discover all paths to the LUN.2. Execute the lun move command to move the LUN to the AFF A/00 HA pair.3. Remove the AFF A200 HA pair from the reporting-nodes list.4. Add the AFF A700 HA pair to the reporting-nodes list.What is the correct sequence in performing, these steps?  1, 2, 3. 4  4. 1, 2, 3  4, 3. 2. 1  3, 2, 1,4 NO.148 Exhibit.Referring to the exhibit, what is the total amount of space that is guaranteed for the LUNs in the /vo1/vo1_sanlunsiprod_03 volume?  0 GB  300 GB  600 GB  2600 GB  Loading … Hit the link below, for getting more info about the Network Appliance NS0-520 Certification Exam Official link to the NS0-520 Exam The most reliable way to get ready for the Network Appliance NS0-520 Certification Exam Getting ready for the Network Appliance NS0-520 Certification Exam is not a difficult task. To accomplish this, you just need to make sure that you follow the instructions given here. First and foremost is to make a well-structured study plan. The study plan should be specific and should include all the topics that are discussed in the Network Appliance NS0-520 Certification Exam. The study plan should also include the exam objectives that are mentioned in the Network Appliance NS0-520 Certification Exam. The study plan should also include the methods and techniques that are required to prepare for the Network Appliance NS0-520 Certification Exam. NS0-520 exam dumps are available for all the methods and techniques that are mentioned in the study plan. It is important to make sure that you follow the study plan that you have made. If you do not follow the study plan that you have made, then it is very likely that you will not be able to prepare for the Network Appliance NS0-520 Certification Exam. You should also make sure that you follow the latest updates in the field of networking and storage. It is important to study for the Network Appliance NS0-520 Certification Exam at least one month before the actual date of the exam. It is recommended that you prepare for the Network Appliance NS0-520 Certification Exam at least two months before the date of the exam. After that, it is very important to follow the methods and techniques that are discussed in the Network Appliance NS0-520 Certification Exam. You should try to understand the concepts and the solutions that are discussed in the Network Appliance NS0-520 Certification Exam. You should also try to solve the questions that are asked in the Network Appliance NS0-520 Certification Exam. Moreover, you should try to solve the questions that are similar to the questions that are asked in the Network Appliance NS0-520 Certification Exam. You should start preparing for the Network Appliance NS0-520 Certification Exam by practicing a lot. It is recommended that you practice as many mock tests as possible.   NS0-520 dumps Exam Material with 236 Questions: https://www.braindumpsit.com/NS0-520_real-exam.html --------------------------------------------------- Images: https://blog.braindumpsit.com/wp-content/plugins/watu/loading.gif https://blog.braindumpsit.com/wp-content/plugins/watu/loading.gif --------------------------------------------------- --------------------------------------------------- Post date: 2023-02-12 09:57:03 Post date GMT: 2023-02-12 09:57:03 Post modified date: 2023-02-12 09:57:03 Post modified date GMT: 2023-02-12 09:57:03