[2023] 156-585 PDF Questions - Perfect Prospect To Go With BraindumpsIT Practice Exam [Q65-Q87] : IT Certification Exam Braindumps : http://blog.braindumpsit.com

NEW QUESTION 65
What is the benefit of running “vpn debug trunc over “vpn debug on”?

“vpn debug trunc” purges ike.elg and vpnd elg and creates limestarnp while starting ike debug and vpn debug

“vpn debug trunc*truncates the capture hence the output contains minimal capture

“vpn debug trunc* provides verbose capture

No advantage one over the other

NEW QUESTION 66
When running a debug with fw monitor, which parameter will create a more verbose output?

-i

-0

-d

NEW QUESTION 67
Which one of the following is NOT considered a Solr core partition:

CPM_0_Revisions

CPM_Global_A

CPM_Gtobal_R

CPM_0_Disabled

NEW QUESTION 68
The two procedures available for debugging in the firewall kernel are
i fw ctl zdebug
ii fw ctl debug/kdebug
Choose the correct statement explaining the differences in the two

(i) Is used for general debugging, has a small buffer and is a quick way to set kernel debug flags to get an output via command line whereas (11) is useful when there is a need for detailed debugging and requires additional steps to set the buffer and get an output via command line

(i) is used to debug the access control policy only, however (n) can be used to debug a unified policy

(i) is used to debug only issues related to dropping of traffic, however (n) can be used for any firewall issue including NATing, clustering etc.

(i) is used on a Security Gateway, whereas (11) is used on a Security Management Server

NEW QUESTION 69
What table does the command “fwaccel conns” pull information from?

fwxl_conns

SecureXLCon

cphwd_db

sxl_connections

NEW QUESTION 70
Joey is configuring a site-to-site VPN with his business partner. On Joey’s site he has a Check Point R80.10 Gateway and his partner uses Cisco ASA 5540 as a gateway.
Joey’s VPN domain on the Check Point Gateway object is manually configured with a group object that contains two network objects:
VPN_Domain3 = 192.168.14.0/24
VPN_Domain4 = 192.168.15.0/24
Partner’s site ACL as viewed from “show run”
access-list JOEY-VPN extended permit ip 172.26.251.0 255.255.255.0 192.168.14.0 255.255.255.0 access-list JOEY-VPN extended permit ip 172.26.251.0 255.255.255.0 192.168.15.0 255.255.255.0 When they try to establish VPN tunnel, it fails. What is the most likely cause of the failure given the information provided?

Tunnel falls on partner site. It is likely that the Cisco ASA 5540 will reject the Phase 2 negotiation. Check Point continues to present its own encryption domain as 192.168.14.0/24 and 192.168.15.0/24, but the peer expects the one network 192.168.14.0/23

Tunnel fails on partner site. It is likely that the Cisco ASA 5540 will reject the Phase 2 negotiation. Check Point continues to present its own encryption domain as 192.168.14.0/23, but the peer expects the two distinct networks 192.168.14.0/24 and 192.168.15.0/24.

Tunnel fails on Joey’s site, because he misconfigured IP address of VPN peer.

Tunnel falls on partner site. It is likely that the Cisco ASA 5540 will reject the Phase 2 negotiation due to the algorithm mismatch.

NEW QUESTION 71
What is the purpose of the Hardware Diagnostics Tool?

Verifying that Check Point Appliance hardware is functioning correctly

Verifying the Security Management Server hardware is functioning correctly

Verifying that Security Gateway hardware is functioning correctly

Verifying that Check Point Appliance hardware is actually broken

NEW QUESTION 72
Which command(s) will turn off all vpn debug collection?

vpn debug off

vpn debug -a off

vpn debug off and vpn debug ikeoff

fw ctl debug 0

NEW QUESTION 73
Vanessa is reviewing ike.elg file to troubleshoot failed site-to-site VPN connection After sending Mam Mode Packet 5 the response from the peer is PAYLOAD-MALFORMED” What is the reason for failed VPN connection?

The authentication on Phase 1 is causing the problem.
Pre-shared key on local gateway encrypted by the hash algorithm created in Packet 3 and Packet 4 doesn’t match with the hash on the peer gateway generated by encrypting its pre-shared key

The authentication on Phase 2 is causing the problem
Pre-shared key on local gateway encrypted by the hash algorithm created in Packets 1 and 2 doesn’t match with the hash on the peer gateway generated by encrypting its pre-shared key

The authentication on Quick Mode is causing the problem
Pre-shared key on local gateway encrypted by the hash algorithm created in Packets 3 and 4 doesn’t match with the hash on the peer gateway generated by encrypting its pre-shared key

The authentication on Phase 1 is causing the problem
Pre-shared key on local gateway encrypted by the hash algorithm doesn’t match with the hash on the peer gateway generated by encrypting its pre-shared key created in Packet 1 and Packet 2

NEW QUESTION 74
Which of the following is contained in the System Domain of the Postgres database?

Saved queries for applications

Configuration data of log servers

Trusted GUI clients

User modified configurations such as network objects

NEW QUESTION 75
When debugging is enabled on firewall kernel module using the ‘fw ctl debug’ command with required options, many debug messages are provided by the kernel that help the administrator to identify issues. Which of the following is true about these debug messages generated by the kernel module?

Messages are written to a buffer and collected using ‘fw ctl kdebug’

Messages are written to console and also /var/log/messages file

Messages are written to /etc/dmesg file

Messages are written to $FWDIR/log/fw.elg

NEW QUESTION 76
When a User process or program suddenly crashes, a core dump is often used to examine the problem. Which command is used to enable the core-dumping via GAIA dish?

set core-dump enable

set core-dump per_process

set user-dump enable

set core-dump total

NEW QUESTION 77
How can you start debug of the Unified Policy with all possible flags turned on?

fw ctl debug -m UP all

fw ctl debug -m UnifiedPolicy all

fw ctl debug -m fw + UP

fw ctl debug -m UP *

NEW QUESTION 78
What acceleration mode utilizes multi-core processing to assist with traffic processing?

CoreXL

SecureXL

HyperThreading

Traffic Warping

NEW QUESTION 79
What is the simplest and most efficient way to check all dropped packets in real time?

fw ctl zdebug * drop in expert mode

Smartlog

cat /dev/fwTlog in expert mode

tail -f SFWDIR/log/fw log |grep drop in expert mode

NEW QUESTION 80
John works for ABC Corporation.They have enabled CoreXL on their firewall John would like to identify the cores on which the SND runs and the cores on which the firewall instance is running. Which command should John run to view the CPU role allocation?

fw ctl affinity -v

fwaccel stat -I

fw ctl affinity -I

fw ctl cores

NEW QUESTION 81
What command is usually used for general firewall kernel debugging andwhatis the sizeofthe buffer that isautomaticallyenabled whenusingthe command?

fw ctl debug, buffer sizeis 1024 KB

fw ell zdebug. buffer size is 32768 KB

fw dl zdebug, buffer size is 1 MB

fw ctl kdeoug. buffer sizeis 32000 KB

NEW QUESTION 82
Rules within the Threat Prevention policy use the Malware database and network objects. Which directory is used for the Malware database?

$FWDIR/conf/install_manager_tmp/ANTIMALWARE/conf/

$CPDIR/conf/install_manager_lmp/ANTIMALWARE/conf/

$FWDlR/conf/install_firewall_imp/ANTIMALWARE/conf/

$FWDlR/log/install_manager_tmp/ANTIMALWARBlog?

NEW QUESTION 83
The management configuration stored in the Postgres database is partitioned into several relational database Domains, like – System, User, Global and Log Domains. The User Domain stores the network objects and security policies. Which of the following is stored in the Log Domain?

Configuration data of Log Servers and saved queries for applications

Active Logs received from Security Gateways and Management Servers

Active and past logs received from Gateways and Servers

Log Domain is not stored in Postgres database, it is part of Solr indexer only

NEW QUESTION 84
What are the four ways to insert an FW Monitor into the firewallkernel chain?

Relative position using location, relativepositionusing alias, absolute position, all positions

Absolute position using location, absolute position using alias, relative position, all positions

Absolute position using location, relative position using alias, general position, all positions

Relative position using geolocation relative position using inertial navigation, absolute position all positions

NEW QUESTION 85
Troubleshooting issues with Mobile Access requires the following:

Standard VPN debugs, packet captures, and debugs of cvpnd’ process on Security Gateway

Standard VPN debugs and packet captures on Security Gateway, debugs of “cvpnd’ process on Security Management

‘ma_vpnd’ process on Secunty Gateway

Debug logs of FWD captured with the command – ‘fw debug fwd on TDERROR_MOBILE_ACCESS=5’

NEW QUESTION 86
Which Daemon should be debugged for HTTPS Inspection related issues?

FWD

HTTPD

WSTLSO

VPND

NEW QUESTION 87
Check Point Access Control Daemons contains several daemons for Software Blades and features. Which Daemon is used for Application & Control Filtering?

rad

cprad

pepd

pdpd

[2023] 156-585 PDF Questions - Perfect Prospect To Go With BraindumpsIT Practice Exam [Q65-Q87]

Who cannot take the CheckPoint 156-585 Certification Exam?