The Realest Study Materials D-RP-OE-A-24 Dumps Updated Oct 08, 2024 [Q18-Q34]

Rate this post

The Realest Study Materials D-RP-OE-A-24 Dumps Updated Oct 08, 2024

LATEST D-RP-OE-A-24 Exam Practice Material

EMC D-RP-OE-A-24 Exam Syllabus Topics:

Topic	Details
Topic 1	Adjusting, and refining existing RecoverPoint safeguards.
Topic 2	Establishing, and overseeing Consistency Groups.
Topic 3	RecoverPoint Operation: In this section, the focus is given to Understanding and utilization of Snapshots and Bookmarks, execution of recovery procedures via Unisphere for RecoverPoint
Topic 4	RecoverPoint Architecture and RecoverPoint Solutions: In this section, the focus is given to essential characteristics, functionalities, and potential applications. It also covers structural design and constituent elements of the system.
Topic 5	RecoverPoint Management: In this section of the exam, the focus is given to the execution of administrative responsibilities, strategic considerations for implementing Consistency Groups

NO.18

Based on the Consistency Group status shown in the exhibit, why is the local copy not connected to the production and remote copy?

Local copy has failed

Consistency Group is failing over

Connection to the local copy cluster has failed

Test a Copy wizard is in progress

NO.19 Which types of I/O modules can be inserted into Slot1 of a Gen-6 RPA?

10 GbE copper or dual-stacked DB-9 ports

1 GbE optical or 1 GbE copper

10 GbE optical or 1 Gb RJ45 copper

10 GbE optical or 10 GbE copper

NO.20 A RecoverPoint system has been deployed with XtremlO at production and disaster recovery sites. What is an accurate statement, if the replication mode for a Consistency Group has been set as “Continuous”?

Set customized time between cycles

Set minimum time between cycles

Effective RPO will be 0 seconds

Effective RPO can be < 60 seconds

NO.21 Which RecoverPoint CLI command can be used to show a summarization of the errors and warnings for either one site or the entire RecoverPoint system?

get_rpa_states

get_events_log

get_clusters_topology

get_system_status

NO.22 Which tools are listed under “System Analysis and Tools” section of Unisphere for RecoverPoint?

Detect Bottlenecks, Balance Load, Collect System Information

Detect Bottlenecks, Balance Load, Configure System Reports and Alerts

Users and Security, Configure System Reports and Alerts, Change Security Level

Users and Security, Configure System Reports and Alerts, Collect System Information

NO.23 What is the purpose of the save_settings command?

Commit cluster configuration changes to the repository volume

Create a script file that can later be used to recreate the system configuration

Preserve the configuration of a RecoverPoint Appliance prior to replacement

Modify or configure the RecoverPoint configuration backup interval

NO.24 A database team is performing tests against a PIT copy of data. Their write activity is going to exceed the currently allocated amount of space dedicated to Image Access mode.
What should be done to allow testing to continue without disruption to their testing?

Navigate to Protection > Manage Protection > Select the CG from the list and select the copy.
Click Edit Journal, and add one or more additional Journal volumes.

Use the config_copy_group= copy= policy image_access_log_size= CLI command

Expand the Journal volume using native array tools.
Navigate to Protection > Manage Protection > Select the CG from the list and select the copy.
Click Edit Journal, and then select “Expand Journal”.

Navigate to Protection > Manage Protection > Select the CG from the list and select the copy.
Click Edit, and then increase the reserved image access percentage from 20%

NO.25 What is the recommended wait period before running the Balance Load tool?

5 Days

7 Days

6 Days

NO.26 For which type of EMC storage array(s) is the RecoverPoint/BK used for in local backups?

Avamar

NetWorker

Data Domain

VNX/VNXe, Unity

RecoverPoint/BK license mode is for local backup of Data Domain storage. RecoverPoint/BK is system-based licensing for all clusters in a RecoverPoint system:
*Synchronous replication
*Multipath I/O support
*Virtualization hypervisor support for Hyper-V and VMware platforms.
*Integration with VMware vCenter, VMware SRM and vSphere VAAI support
*Built-in bandwidth reduction
*Two to eight RecoverPoint appliances per RPA cluster for failure resiliency and throughput
* RecoverPoint/BK Overview:
* RecoverPoint/BK is a specialized licensing mode designed for local backup operations specifically aimed at EMC’s Data Domain storage systems. It enhances the data protection capabilities by integrating with Data Domain for efficient backup and recovery processes.
* Functionality and Features:
* Local Backup: The RecoverPoint/BK license mode is particularly utilized for local backups of Data Domain storage arrays. It ensures that the data stored on Data Domain systems can be effectively backed up and restored locally.
* Synchronous Replication: Provides real-time data replication between the primary and backup locations to ensure data consistency.
* Multipath I/O Support: Ensures high availability and reliability by providing multiple data paths to storage.
* Hypervisor Support: Supports virtualization platforms such as Hyper-V and VMware, allowing integration with various virtualized environments.
* Integration with VMware: Supports integration with VMware vCenter, VMware SRM, and vSphere VAAI, enabling seamless management and operation within VMware environments.
* Bandwidth Reduction: Includes built-in features to reduce bandwidth usage during data replication and backup operations.
* Resiliency and Throughput: Supports two to eight RecoverPoint appliances per RPA cluster, enhancing failure resiliency and throughput for robust data protection.
* Reference from EMC Documentation:
* RecoverPoint/BK license mode is explicitly mentioned for local backups of Data Domain storage arrays, providing a comprehensive data protection solution with advanced features tailored for Data Domain.

NO.27 If a RecoverPoint Consistency Group consists of three production volumes and each has two remote copies, how many replication sets will be contained in this group?

NO.28 Which RPA type(s) connect to protected storage using iSCSI?

vRPA only

Gen-6 and vRPA

Gen-6 only

Gen-5 and Gen-6

NO.29 Which EMC product integrates with RecoverPoint to provide application-driven point-in-time copies?

AppSync

ProtectPoint

Data Domain

ViPR SRM

NO.30 To determine whether physical or virtual RPAs are in use on a specific cluster, what is a correct sequence of steps to determine the type of RPAs for that cluster when using Unisphere?

Click on Protection > Cluster name > RPA details

Click on Admin > System Analysis Tools > RPAs

Click on RPA clusters > Cluster name > RPAs

Click on Dashboard > RPAs > RPA type

NO.31

A storage administrator is creating a Consistency Group using Unisphere on RecoverPoint/EX. After defining the production volume and Journal, the next step is to select the copy volume. Based on the exhibit, what determines the volume size displayed by the wizard as a choice of copy volumes?

Volumes that are created on the selected array and masked to the backup host

Volumes that are masked to the selected cluster and the same size or larger than production

Any volume that is provisioned to the selected cluster from the same array type as production

Volumes that are the same size and attached to the selected write splitter

NO.32 What is the result of configuring the I/O throttling level to “low”?

Limit the data parallelism and I/O parallelism of all RPAs in a RecoverPoint cluster to a maximum read rate of 200 MB/s

Limit the data parallelism and I/O parallelism of all RPAs in a RecoverPoint cluster to a maximum read rate of 10 MB/s

Limit the data parallelism and I/O parallelism on the particular RPA where the setting will permit a maximum read rate of 10 MB/s

Limit the data parallelism and I/O parallelism on the particular RPA where the setting will permit a maximum read rate of 200 MB/s

NO.33 A storage administrator has seen high-load events in their RecoverPoint environment. The administrator wants to review the performance data for the past week with RecoverPoint. In addition, the administrator wants the raw data saved to a spreadsheet to review and create graphs of system performance over a period of time.
Which CLI command should be used?

balance_load

get_rpa_statistics

detect_bottlenecks

NO.34 A RecoverPoint administrator is failing over a Consistency Group including two non-production copies. What will be the replication state between the new production and former production when the administrator selects “Set Copy as Production”?

Replication is paused between the new production and former production

A short initialization is started between the new production and former production

A volume sweep is started between the new production and former production

A full sweep is started between the new production and former production