Real Cisco 300-410 Exam Dumps with Correct 563 Questions and Answers [Q49-Q65]

5/5 - (1 vote)

Real Cisco 300-410 Exam Dumps with Correct 563 Questions and Answers

Valid 300-410 Test Answers & Cisco 300-410 Exam PDF

Infrastructure Services

In the framework of this domain that covers 25% of the whole content, the learners are required to demonstrate their competence in the following:

Troubleshooting IPv6 & IPv4 DHCP (IOS DHCP server, DHCP options, DHCP client, and DHCP server);
Troubleshooting network performance problems with the usage of IP SLA, including connectivity, tracking objects, jitter, and delay;
Troubleshooting NetFlow, which includes the v5, v9, and flexible NetFlow;
Troubleshooting SNMP (v2c & v3);
Using Cisco DNA Center to troubleshoot the network issues.
Using logging to troubleshoot the specified network problems;

QUESTION 49
Exhibit:

BGP is flapping after the Copp policy is applied. What are the two solutions to fix the issue?
(Choose two)

Configure BGP in the COPP-CRITICAL-7600 ACL

Configure a higher value for CIR under the default class to allow more packets during peak traffic

Configure a higher value for CIR under the class COPP-CRITICAL-7600

Configure a three-color policer instead of two-color policer under class COPP-CRITICAL-
7600

Configure IP CEF to CoPP policy and BGP to work

QUESTION 50
Refer to the exhibit.

An administrator is configuring a GRE tunnel to establish an EIGRP neighbor to a remote router. The other tunnel endpoint is already configured. After applying the configuration as shown, the tunnel started flapping. Which action resolves the issue?

Modify the network command to use the Tunnel0 interface netmask

Advertise the Loopback0 interface from R2 across the tunnel

Stop sending a route matching the tunnel destination across the tunnel

Readdress the IP network on the Tunnel0 on both routers using the /31 netmask

QUESTION 51
Refer to the exhibit.

Drag and drop the credentials from the left onto the remote login information on the right to resolve a failed login attempt to vtys. Not all credentials are uf SLA by defining frequency and schedulingsed

QUESTION 52
Refer to the exhibit.

Refer to the exhibit The route to 192 168 200 0 is flapping between R1 and R2 Which set of configuration changes resolves the flapping route?

Option A

Option B

Option C

Option D

QUESTION 53
Refer to the exhibit.

Troubleshoot and ensure that branch B only ever uses the MPLS B network to reach HQ. Which action achieves this requirement?

Introduce an AS path filter on branch A routers so that only local prefixes are advertised into BGP

increase the local preference for all HQ prefixes received at branch B from the MPLS B network to be higher than the local preferences used on the MPLS A network

Introduce AS path prepending on the branch A MPLS B network connection so that any HQ advertisements from branch A toward the MPLS B network are prepended three times

Modify the weight of all HQ prefixes received at branch B from the MPLS B network to be higher than the weights used on the MPLS A network

QUESTION 54
Refer to Exhibit.

Which statement about redistribution from BGP into OSPF process 10 is true?

Network 172.16.1.0/24 is not redistributed into OSPF.

Network 10.10 10.0/24 is not redistributed into OSPF

Network 172.16.1.0/24 is redistributed with administrative distance of 1.

Network 10.10.10.0/24 is redistributed with administrative distance of 20.

QUESTION 55
Refer to the exhibit.

An engineer must configure a LAN-to-LAN IPsec VPN between R1 and the remote router. Which IPsec Phase 1 configuration must the engineer use for the local router?

crypto isakmp policy 5
authentication pre-share
encryption 3des
hash sha
group 2
!
crypto isakmp key cisco123 address 200.1.1.3

crypto isakmp policy 5
authentication pre-share
encryption 3des
hash md5
group 2
!
crypto isakmp key cisco123 address 200.1.1.3

crypto isakmp policy 5
authentication pre-share
encryption 3des
hash md5
group 2
!
crypto isakmp key cisco123 address 199.1.1.1

crypto isakmp policy 5
authentication pre-share
encryption 3des
hash md5
group 2
!
crypto isakmp key cisco123! address 199.1.1.1

QUESTION 56
Refer to the exhibit.

Refer to the exhibit. The remote server is failing to receive the NetFlow data Which action resolves the issue?

Modify the flow transport command transport udp 2055 to move under flow monitor profile.

Modify the interlace command to Ip flow monitor FLOW-MONITOR-1 Input.

Modify the udp port under flow exporter profile to Ip transport udp 4739.

Modify the flow record command record v4_r1 to move under flow exporter profile.

QUESTION 57

Refer to the exhibit. An engineer has successfully set up a floating static route from the BRANCH router to the HQ network using HQ_R1 as the primary default gateway When the g0/0 goes down on HQ_R1, the branch network cannot reach the HQ network 192.168.20.0/24. Which set of configurations resolves the issue?

HQ_R3(config)# ip sla responder
HQ_R3(config)# ip sla responder icmp-echo 172.16.35.1

BRANCH(config)# ip sla 1
BRANCH(config-ip-sla)# icmp-echo 192.168.100.2

HQ R3(config)# Ip sla responder
HQ R3(config)# Ip sla responder Icmp-echo 172.16.35.5

BRANCH(config)# Ip sla 1
BRANCH(config-ip-sta)# Icmp-echo 192.168.100.1

QUESTION 58
Drag and Drop the IPv6 First-Hop Security features from the left onto the definitions on the right.

QUESTION 59
Drag and drop the DHCP messages from the left onto the correct uses on the right.

QUESTION 60
Refer to the exhibit.

A network engineer for AS64512 must remove the inbound and outbound traffic from link A during maintenance without closing the BGP session so that there ………… a backup link over link A toward the ASN.
Which BGP configuration on R1 accomplishes this goal?

QUESTION 61
Refer to the exhibit.

An engineer configures the router 10.1.100.10 for EIGRP autosummarization so that R1 should receive the summary route of 10.0.0.0/8. However, R1 receives more specific /24 routes.
Which action resolves this issue?

Router R1 should configure ip summary address eigrp (AS number) 10.0.0.0 255.0.0.0 for the R1 Fast Ethernet 0/0 connected interface.

Router R1 should configure ip route 10.0.0.0 255.0.0.0 null 0 for the routes that are received on R1.

Router 10.1.100.10 should configure ip route 10.0.0.0 255.0.0.0 null 0 for the routes that are summarized toward R1.

Router 10.1.100.10 should configure ip summary address eigrp (AS number) 10.0.0.0 255.0.0.0 for the R1 Fast Ethernet 0/0 connected interface.

QUESTION 62
During the maintenance window an administrator accidentally deleted the Telnet-related configuration that permits a Telnet connection from the inside network (Eth0/0) to the outside of the networking between Friday – Sunday night hours only. Which configuration resolves the issue?
A)

B)

C)

D)

Option A

Option B

Option C

Option D

QUESTION 63
Which command displays the IP routing table information that is associated with VRF-Lite?

show ip vrf

show ip route vrf

show run vrf

show ip protocols vrf

QUESTION 64
Refer to the exhibit.

An engineer has configured R1 as EIGRP stub router. After the configuration, router R3 failed to reach to R2 loopback address.
Which action advertises R2 loopback back into the R3 routing table?

Add a static route for R2 loopback address in R1 and redistribute it to advertise to R3.

Use a leak map on R1 that matches the required prefix and apply it with the distribute list command toward R3.

Use a leak map on R3 that matches the required prefix and apply it with the EIGRP stub feature.

Add a static null route for R2 loopback address in R1 and redistribute it to advertise to R3.

QUESTION 65
Refer to the exhibit.

An engineer identifier a Layer 2 loop using DNAC. Which command fixes the problem in the SF-D9300-1 switch?

no spanning-tree uplinkfast

spanning-tree loopguard default

spanning-tree backbonesfast

spanning-tree portfast bpduguard

Cisco 300-410 certification exam is designed for IT professionals who want to validate their skills and knowledge in advanced routing and services for enterprise networks. 300-410 exam is part of the Cisco Certified Specialist – Enterprise Advanced Infrastructure Implementation certification track and is intended for professionals who have experience with enterprise network infrastructures.

300-410 Exam Questions and Valid PMP Dumps PDF: https://www.braindumpsit.com/300-410_real-exam.html