HPE6-A75 Dumps PDF 2022 Program Your Preparation EXAM SUCCESS [Q37-Q55]

Rate this post

HPE6-A75 Dumps PDF 2022 Program Your Preparation EXAM SUCCESS

Get Perfect Results with Premium HPE6-A75 Dumps Updated 62 Questions

HP HPE6-A75 Exam Syllabus Topics:

Topic	Details
Topic 1	Given a scenario, predict the outcome based on the changes to the security configuration Integrate components of the Aruba Mobile First Architecture
Topic 2	Configure and deploy redundant controller solutions based upon a given design Given the customer requirements, design the high-level architecture
Topic 3	Given a scenario with an identified security issue, determine the remediation actions Given a scenario, translate the business needs of the environment into technical customer requirements
Topic 4	Given a customer scenario, explain how a specific technology or solution would meet the customer requirements Explain Remote Access architectures and how to integrate the architectures
Topic 5	Given a scenario, evaluate the customer requirements to identify gaps per a gap analysis Given a customer scenario, design and document the logical and physical network solutions
Topic 6	Given an outline of a customer’s needs, determine the information required to create a solution Enable multicast DNS features to support discovery across VLAN boundaries
Topic 7	Given a scenario, select the appropriate products based on the customer technical requirements Differentiate between redundancy methods, and describe the benefits of L2 and L3 clustering
Topic 8	Use AirWave to monitor an Aruba Mobility Master and Mobility Controller Explain ArubaOS-Switch security features and configuration concepts

NO.37 What is true about clustering and AP connections to cluster members?

The AP will always stay connected to the LMS IP address configured in the AP profile.

During rebalancing, the active load is redistributed first.

The default thresholds are 75% for the Rebalanced Threshold and 25% for the Unbalanced Threshold.

AP load balancing is disabled by default.

NO.38 Refer to the exhibit.

Which statements accurately describe the status of the Onboarded devices in the configuration tor the network settings shown? (Select two.)

They will connect to Employee_Secure SSID after provisioning.

They will connect to Employee_Secure SSID for provisioning their devices.

They will use WPA2-PSK with AES when connecting to the SSID.

They will connect to secure_emp SSID after provisioning.

They will perform 802.1X authentication when connecting to the SSID.

NO.39 OSPF is configured on an AOS-Switch, and the network administrator sets the router ID to 10.0.0.1. The administrator wants to be able to reach the switch at this ID from any location throughout the OSPF system. The administrator also needs the router ID to De stable and available, even if some links on the switch fail.
What should the administrator do?

Make sure that 10.0.0.1 is the IP address on the VLAN with the lowest ID.

Configure 10.0.0.1 on a loopback interface, and enable OSPF on that interface.

Configure 10.0.0.1 as a manual OSPF neighbor on each switch in the OSPF system.

Configure 10.0.0.1 as a secondary IP address on the switch 00BM poet.

NO.40 Why is a terminate session enforcement profile used during posture checks with 802.1 x authentication?

To send a RADIUS CoA message from the ClearPass server to the client

To disconnect the user for 30 seconds when they are in an unhealthy posture state

To blacklist the user when they are in an unhealthy posture state

To force the user to re-authenticate and run through the service flow again

To remediate the client applications and firewall do that updates can be installed

NO.41 Refer to the exhibit.

Based on the Policy configuration shown, which VLAN will be assigned when a user with ClearPass role Engineer authenticates to the network successfully on Saturday using connection protocol WEBAUTH?

Deny Access

Employee VLAN

Internet VLAN

Full Access VLAN

NO.42 Refer to the exhibit.

An AD user’s department attribute is configured as *HR”. The user connects on Monday using their Windows Laptop to a switch that belongs to the Device Group HQ. Which role is assigned to the user in ClearPass?

Executive

iOS Device

Vendor

Remote Employee

HR Local

NO.43 An administrator supports a cluster of four Aruba Mobility Controllers (MCs) with management addresses of 10.1.100.101, 10.1.100.102, 10.1.100.103, and 10.1.202.181. The administrator accesses an AP associated with this cluster, reboots it and accesses apboot mode. The administrator executes the printenv command. Which AP parameter contains the IP addresses of the cluster members that the AP should use to connect to the cluster?

Noodelist

Servername

Master_ip

Cfg_lms

NO.44 Refer to the exhibit.

Based on the configuration for the client’s certificate private key as shown, which statements accurately describe the settings? (Select two.)

More bits in the private key will increase security.

The private key for TLS client certificates is not created.

The private key is stored in the ClearPass server.

More bits in the private key will reduce security.

The private key is stored in the user device.

NO.45 Refer to the exhibit.

Based on the Attribute configuration shown, which statement accurately describes the status of attribute values?

Only the attribute values of department and memberOf can be used in role mapping policies.

The attribute values of department, title, memberOf, telephoneNumber, and mail are directly applied as ClearPass.

Only the attribute value of company can be used in role mapping policies, not the other attributes.

The attribute values of department and memberOf are directly applied as ClearPass roles.

Only the attribute values of title, telephoneNumber, and mail can be used in role mapping policies.

NO.46 An administrator implements a standalone controller that runs ArubaOS 8.x. Which feature should the administrator configure to optimize the RF operation for the company’s WLAN?

AirMatch

Clustering

ARM

Zones

NO.47 Refer to the exhibit.

The network administrator needs to set up BGP between the two company switches. Switch-1 and Switch-2. The BGP connection does not establish. Based on the exhibits, what does the administrator need to do to fix the issue?

Enable the multihop option for the neighbor on each of the switches.

Enter the network command for 10.0.0.0/24 in the router BGP mode on each switch.

Enable BGP on the interfaces that the switches use to reach each other.

Set the update source for the neighbor to the local loopback interface on each switch.

NO.48 Which ArubaOS CLl command can an administrator execute to determine if AP load balancing is enabled in a cluster?

show switches

show lc-cluster group-membership

show aaa cluster essid

show ap active

NO.49 An administrator deploys Aruba Mobility Controller 7005s to a company’s branch offices. The administrator wants to disable the console port to prevent unauthorized access to the controllers.
Which controller command should the administrator use to implement this policy?

no console enable

no mgmt-user console

mgmt-user console-block

console disable

NO.50 An administrator creates service-based policies for AirGroup on the Mobility Master (MM). The administrator can define location-based policy limits based on which information?

AP names, AP groups, controller names, and controller groups

AP Fully Qualified Location Names (FQLNs) and controller Fully Qualified Domain Names (FQDNs)

AP names, AP groups, and AP Fully Qualified Location Names (FQLNs)

Controller names, controller groups, and controller Fully Qualified Domain Names (FQDNs)

NO.51 A company has AOS-Switches deployed at sites with inexperienced IT staff. The main office network administrators want to track if configurations change on branch switches. What should be set up for this purpose?

an SNMP trap

an RMON alarm

an auto-config server

an lP SLA profile

NO.52 What is a primary use case for RPVST+ on AOS-Switches?

more granular load balancing than MSTP when access switches connect to two core switches

enhanced loop protection in an MSTP network

integration of AOS-Switches in a heterogeneous vendor network that uses the Cisco protocol

seamless integration with RSTP

NO.53 An administrator wants to use Airwave to manually add devices on the network. Where should the administrator perform this action?

in Device Setup

in Groups

in AMP Setup

in Devices

NO.54 Refer to the exhibit.

Several interfaces on an AOS-Switch enforce 802. IX to a RADIUS server at 10.254.378.521. The interface 802. IX settings are shown in the exhibit, and 802. IX is also enabled globally. The security team have added a requirement tor port security on the interfaces as well. Before administrators enable port security, which additional step must they complete to prevent issues?

Set an 802. l X client limit on the interfaces.

Manually add legitimate MAC addresses to the switch authorized MAC list.

Enable eavesdropping protection on the interfaces.

Enable DHCP snooping on VLAN 20.

NO.55 An administrator supports a RAP to a branch office. Employees at the branch office connect to an employee SSID that allows for split tunneling of the employee traffic. The RAP initially connects to the corporate office controller, but later loses connectivity to it.
Which operating mode should the administrator configure for a secondary SSID to be advertised during the loss of connectivity?

Standard

Persistent

Always

Backup

Loading …