[Jul 21, 2022] Fully Updated Dumps PDF – Latest C-IBP-2105 Exam Questions and Answers [Q23-Q47]

Rate this post

[Jul 21, 2022] Fully Updated Dumps PDF – Latest C-IBP-2105 Exam Questions and Answers

100% Free C-IBP-2105 Exam Dumps to Pass Exam Easily from BraindumpsIT

NEW QUESTION 23
You have set up a planning area and data is available. You adjust the necessary time profile settings and run the consistency check. Which settings can you change and still run a successful consistency check?
Note: There are 2 correct Answers to this question.

Change the description of the attributes in the time profile.

Remove an attribute assigned to the time profile level if the attribute is used in a planning level.

Change the past and future horizon of the levels in the time profile.

Add a new time profile level to the time profile.

NEW QUESTION 24
Which calculations can be processed within the pre-processing step in the forecasting model? Note:
There are 2 correct Answers to this question.

Correlations can be evaluated.

Promotion Sales Lift Ups can be deleted.

Rounding can be executed for the sales history.

Missing Values can be substituted.

NEW QUESTION 25
A time profile is defined with the levels of day, technical week, week, month, quarter, and year. What condition in configuration will allow you to have a different value in the current week, versus all other buckets?

IF(“PERIODID5” =”$$PERIODID5CU$$…)

IF(“PERIODID3” =”$$PERIODID3CU$$…)

IF(“PERIODID4” =”$$PERIODID4CU$$…)

IF(“PERIODID2” =”$$PERIODID2CU$$…)

NEW QUESTION 26
Which of the following settings can you use in your supply planning background job triggered from Excel? Note: There are 2 correct Answers to this question.

Target currency

Type of algorithm to use

UOM to ID

Planning unit

NEW QUESTION 27
While modeling costs for optimization, you are conscious of the necessity to respect inventory targets and meet demands in the short term. Which of the following are valid relationships between costs you must adhere to? Note: There are 2 correct Answers to this question.

Target inventory violation cost should be greater than inventory holding cost rate.

Target inventory violation cost should be less than max inventory violation cost.

Target inventory violation cost should be greater than discount for demand lateness.

Target inventory violation cost should be less than transportation cost rate.

NEW QUESTION 28
Which of the following are the key features of SAP Supply Chain Control Tower? Note: There are 2 correct Answers to this question.

Ability to create a feasible plan

Ability to use task and case management

Ability to balance demand and supply and attain financial targets

Ability to create smart alerts

NEW QUESTION 29
Which property of an attribute will allow it to be used as an attribute as a key figure?

Type TIMESTAMP

Type INTEGER

Type DECIMAL

Type NAVCHAR

NEW QUESTION 30
You are modeling the introduction of a new product using Lifecycle Planning functionality in SAP IBP.
What is mandatory to create in your planning area for the setup of reference product(s) to work? Note:
There are 2 correct Answers to this question.

Definition of an attribute representing the product ID

Planning objects for the new product

Definition of an attribute representing the product description

Definition of Actual Sales business meaning for one key figure

NEW QUESTION 31
What differentiates the Create New (Simple copy) and the Create New with Dependencies (Advanced copy) functions of a planning area? Note: There are 2 correct Answers to this question.

Master data is only shared between the original and the new planning area when you use the Create New (Simple copy) function.

The planning view favorites are only copied when you use the Advanced copy.

Associated attributes are only shared between the original and the new planning area when you use the Create New (Simple copy) function.

A copy of the time profile is only created when you use the Create New with Dependencies (Advanced copy) function.

NEW QUESTION 32
You define fixing for a key figure. Which of the following functions are available for this key figure? Note:
There are 2 correct Answers to this question.

Fixing is possible for a certain quantity of a key figure value.

Fixing is possible for manually editable key figures.

Fixing is possible for system editable key figures.

Fixing is possible for a certain period, including all child values in the hierarchy.

NEW QUESTION 33
Where can we see the results of Time Series analysis in SAP IBP?

Time Series Property Attribute in Customer Product

Time Series Property Attribute in Product

Time Series Property Attribute in Customer Source

Time Series Property Attribute in Customer

NEW QUESTION 34
Why would you set up a cascading filter in the planning view? Note: There are 2 correct Answers to this question.

To filter using attributes that have a large number of values

To filter attributes based on other attribute filters

To filter attributes based on specific values

To filter data in an Application Job template

NEW QUESTION 35
Which of the following approaches could you take to reduce run times of an optimizer? Note: There are
2 correct Answers to this question.

Use a subnetwork ID to reduce the size of the problem.

Increase the use of incremental lot size beyond the frozen horizon.

Split into multiple planning areas to support weekly vs. daily planning needs.

Avoid using telescopic time buckets.

NEW QUESTION 36
You need to create time periods for the time profile in a planning are
a. What should you be aware of when executing the Create Time Periods application job?

The planning area with this time profile must be activated so that the application job can proceed.

This application job cannot be scheduled for immediate start.

A time profile has to be activated so that the application job can proceed.

This application job can be run for multiple time profiles at once.

NEW QUESTION 37
You want to restrict value entries outside of a specified range into a key figure. What setting will you use to achieve that goal?

By restricting data input in the Key Figure Configuration app

IBP -> Data Validation in IBP Formatting Sheet tab

Select Protect Active Worksheet in the About section of SAP IBP tab

IBP -> Lock Selected cells in IBP Formatting Sheet tab

NEW QUESTION 38
Which of the following stages can be modeled using scenarios from the S&OP planning cycle? Note:
There are 2 correct Answers to this question.

Demand review

Demand-supply balancing

Demand sensing stage

Data input review for inventory

NEW QUESTION 39
Which SAP IBP planning operator can be run to delete planning objects in a certain version?

Purge Non-Confirming Data

Purge Key Figure Data Outside Planning Area Planning Horizon

Purge Key Figure Data

Purge Master Data

NEW QUESTION 40
What setting is mandatory in the Manage Lifecycle Planning app when introducing a new product?

Define which key figure can be used as sales history for new products

Define at least one attribute of the planning area which represents the Product ID

Define which phase-in and phase-out profiles can be used within Lifecycle Planning

Define which is the attribute ID for the Lifecycle profiles

NEW QUESTION 41
What function would you use to configure a year-to-date calculation?

Last Period Aggregation

Rolling Aggregation

Dynamic Rolling Aggregation

Cumulative Aggregation

NEW QUESTION 42
You are invited to review a problem with a customer’s SAP IBP Excel template performance. What areas with the biggest potential performance impact would you focus on? Note: There are 2 correct Answers to this question.

Complex calculation graphs for key figures

Number of local members and complexity of calculations

Excessive IBP formatting in Excel UI

Number of analytics charts displaying key figures’ values

NEW QUESTION 43
You create a planning filter using an SAP IBP Fiori app. Which of the following objects can it be applied to? Note: There are 2 correct Answers to this question.

Snapshot operator in the SAP IBP add-in for Microsoft Excel

Supply chain graph in Supply Chain Network app

Jobs in the Applications Jobs app

Planning view templates in the SAP IBP add-in for Microsoft Excel

NEW QUESTION 44
You are reviewing the master data types for supply planning. Which master data types are compound master data types? Note: There are 2 correct Answers to this question.

SOURCELOCATION

LOCATIONFR

SOURCECUSTOMER

SOURCEPRODUCTION

NEW QUESTION 45
You want to set up demand sensing to analyze demand changes in execution or close to execution windows. Which of the following conditions must you consider during the setup? Note: There are 2 correct Answers to this question.

Set up the forecast model to be executed at product-location level.

It is mandatory to load historical lag-based snapshot data.

The result generates sensed demand data at the monthly time granularity for the full time horizon.

At setup test the system to run the demand sensing (full) algorithm weekly and the demand sensing (update) on a daily basis.

NEW QUESTION 46
You are modeling a substitution scenario associated with a promotion. What are some of the Master Data parameters that you need to maintain to ensure desired results generated by the optimizer? Note:
There are 2 correct Answers to this question.

Loc-Prod Subst Valid-From Date

Promotion duration

Location Product Sub Cost Rate

Flag ‘Disable Substitution of Location Products’

NEW QUESTION 47
When you promote calculated and approved inventory parameters from SAP IBP for inventory, what other IBP modules can be receiving them? Note: There are 2 correct Answers to this question.

SAP IBP for demand

SAP IBP for response and supply

SAP IBP for sales and operations

DDMRP

Loading …

SAP C-IBP-2105 Certification Exam Topics:

Topic Areas	Topic Details, Courses, Books
Demand Planning 8% – 12%	Create statistical forecast using historical data with basic methods. IBP200 (SAP IBP OD 2105) IBP600 (SAP IBP OD 2105)
Key Figures & Attributes > 12%	Create and use key figures and attributes. IBP200 (SAP IBP OD 2105) IBP300 (SAP IBP OD 2105)
Analytics and Reporting < 8%	Define and view information with user-defined charts and dashboards. IBP200 (SAP IBP OD 2105) IBP300 (SAP IBP OD 2105)
Solution Architecture < 8%	Describe the benefits of implementing SAP’s Integrated Business Planning solution. IBP100 IBP200 (SAP IBP OD 2105) IBP300 (SAP IBP OD 2105)
Planning Operators & Application Jobs > 12%	Use Planning Operators. IBP300 (SAP IBP OD 2105)
Supply and Response > 12%	Configure supply planning, run various solvers to generate planning results IBP100 IBP110 IBP200 (SAP IBP OD 2105) IBP700 (SAP IBP OD 2105)