2023 350-401 Premium Files Test pdf - Free Dumps Collection [Q180-Q202]

Rate this post

2023 350-401 Premium Files Test pdf – Free Dumps Collection

Get ready to pass the 350-401 Exam right now using our CCNP Enterprise Exam Package

NEW QUESTION 180
Drag and drop the characteristics from the left onto the orchestration tools that they describe on the right.

NEW QUESTION 181
Refer to the exhibit.

The administrator troubleshoots an EtherChannel that keeps moving to err-disabled. Which two actions must be taken to resolve the issue? (Choose two.)

Reload the switch to force EtherChannel renegotiation

Ensure that interfaces Gi1/0/2 and Gi1/0/3 connect to the same neighboring switch.

Ensure that the switchport parameters of Port channel1 match the parameters of the port channel on the neighbor switch

Ensure that the corresponding port channel interface on the neighbor switch is named Port-channel1.

Ensure that the neighbor interfaces of Gi1/0/2 and Gi/0/3 are configured as members of the same EtherChannel

NEW QUESTION 182
Drag and drop the LISP components on the left to their descriptions on the right. Not all options are used.

NEW QUESTION 183
Drag and drop the LIPS components on the left to the correct description on the right.

NEW QUESTION 184
What it the purpose of the LISP routing and addressing architecture?

It creates two entries for each network node, one for its identity and another for its location on the network.

It allows LISP to be applied as a network virtualization overlay though encapsulation.

It allows multiple instances of a routing table to co-exist within the same router.

It creates head-end replication used to deliver broadcast and multicast frames to the entire network.

NEW QUESTION 185

Refer to the exhibit Drag and drop the snippets into the RESTCONF request to form the request that returns this response Not all options are used

NEW QUESTION 186
What is the difference between CEF and process switching?

CEF processes packets that are too complex for process switching to manage.

CEF is more CPU-intensive than process switching.

CEF uses the FIB and the adjacency table to make forwarding decisions, whereas process switching punts each packet.

Process switching is faster than CEF.

NEW QUESTION 187
Refer to the exhibit.

Only administrators from the subnet 10.10.10.0/24 are permitted to have access to the router. A secure protocol must be used for the remote access and management of the router instead of clear-text protocols.
Which configuration achieves this goal?

Option A

Option B

Option C

Option D

NEW QUESTION 188
Which statement about multicast RPs is true?

RPs are required only when using protocol independent multicast dense mode.

RPs are required for protocol independent multicast sparse mode and dense mode.

By default, the RP is needed periodically to maintain sessions with sources and receivers.

By default, the RP is needed only to start new sessions with sources and receivers.

NEW QUESTION 189
Refer to the exhibit.

R1 has a BGP neighborship with a directly connected router on interface Gi0/0.
Which command set is applied between the iterations of show ip bgp 2.2.2.2?

R1(config)#router bgp 65001
R1(config-router)#neighbor 192.168.50.2 shutdown

R1(config)#router bgp 65002
R1(config-router)#neighbor 192.168.50.2 shutdown

R1(config)#no ip route 192.168.50.2 255.255.255.255 Gi0/0

R1(config)#ip route 2.2.2.2 255.255.255.255 192.168.50.2

NEW QUESTION 190
Refer to the exhibit.

What step resolves the authentication issue?

use basic authentication

change the port to 12446

target 192 168 100 82 in the URI

restart the vsmart host

NEW QUESTION 191
An engineer creates the configuration below. Drag and drop the authentication methods from the left into the order of priority on the right. Not all options are used.

NEW QUESTION 192
Drag and drop the virtual component from the left onto their descriptions on the right.

NEW QUESTION 193
Refer to the exhibit.

After an engineer configures an EtherChannel between switch SW1 and switch SW2, this error message is logged on switch SW2.

Based on the output from SW1 and the log message received on Switch SW2, what action should the engineer take to resolve this issue?

Configure the same protocol on the EtherChannel on switch SW1 and SW2.

Connect the configuration error on interface Gi0/1 on switch SW1.

Define the correct port members on the EtherChannel on switch SW1.

Correct the configuration error on interface Gi0/0 switch SW1.

NEW QUESTION 194
Refer to exhibit.

VLANs 50 and 60 exist on the trunk links between all switches All access ports on SW3 are configured for VLAN 50 and SW1 is the VTP server Which command ensures that SW3 receives frames only from VLAN
50?

SW1 (config)#vtp pruning

SW3(config)#vtp mode transparent

SW2(config)=vtp pruning

SW1 (config >>vtp mode transparent

NEW QUESTION 195
Drag and drop the descriptions of the VSS technology from the left to the right. Not all options are used.

NEW QUESTION 196
Refer to the exhibit.

Link1 is a copper connection and Link2 is a fiber connection. The fiber port must be the primary port for all forwarding. The output of the show spanning-tree command on SW2 shows that the fiber port is blocked by spanning tree. An engineer enters the spanning- tree port-priority 32 command on GO/1 on SW2, but the port remains blocked. Which command should be entered on the ports that are connected to Link2 to resolve the issue?

Enter spanning-tree port-priority 32 on SW1.

Enter spanning-tree port-priority 224 on SW1.

Enter spanning-tree port-priority 4 on SW2.

Enter spanning-tree port-priority 64 on SW2.

NEW QUESTION 197
What is a characteristic of a next-generation firewall?

only required at the network perimeter

required in each layer of the network

filters traffic using Layer 3 and Layer 4 information only

provides intrusion prevention

NEW QUESTION 198
Refer to the exhibit.

An engineer must permit traffic from these networks and block all other traffic An informational log message should be triggered when traffic enters from these prefixes Which access list must be used?

access-list acl_subnets permit ip 10.0.32.0 0 0.0.255 log

access-list acl_subnets permit ip 10.0.32.0 0.0.7.255 log

access-list acl_subnets permit ip 10.0.32.0 0.0.7.255 access-list acl_subnets deny ip any log

access-list acl_subnets permit ip 10.0.32.0 255.255.248.0 log

NEW QUESTION 199
A network administrator is implementing a routing configuration change and enables routing debugs to track routing behavior during the change. The logging output on the terminal is interrupting the command typing process.
Which two actions can the network administrator take to minimize the possibility of typing commands incorrectly? (Choose two.)

Configure the logging synchronous global configuration command.

Configure the logging synchronous command under the vty.

Increase the number of lines on the screen using the terminal length command.

Configure the logging delimiter feature.

Press the TAB key to reprint the command in a new line.

NEW QUESTION 200
Refer to exhibit.

VLANs 50 and 60 exist on the trunk links between all switches All access ports on SW3 are configured for VLAN 50 and SW1 is the VTP server Which command ensures that SW3 receives frames only from VLAN 50?

SW1(config)#vtp pruning

SW3(config)#vtp mode transparent

SW2(config)#vtp pruning

SW1(config)#vtp mode transparent

NEW QUESTION 201
Refer to the exhibit.

After an engineer configures an EtherChannel between switch SW1 and switch SW2, this error message is logged on switch SW2.

Based on the output from SW1 and the log message received on Switch SW2, what action should the engineer take to resolve this issue?