NO.41 Factory terminations, such as used for making patchcords, generally use what method of attaching the connector to the cable?

NO.42 A fiber stripper removes the __________ of the fiber.

NO.43 Structured cabling standards call for a maximum length of UTP cable for voice (POTS) of __________.

NO.44 For planning office layout, each user should be allocated _______ floor space.

NO.45 Which punchdown block is more often used with POTS telephone connections?

NO.46 The largest contributor to fiber attenuation is __________.

NO.47 Multiple Response: Identify one or more choices that best complete the statement or answer the question.
Singlemode transceivers use __________ sources for their higher coupled power and bandwidth.

NO.48 Information on the safety of chemicals used in fiber optics are __________.

NO.49 You can keep track of how much cable is left in a box if you ___________.

NO.50 Both mechanical splices and prepolished/splice connectors require a good __________ to have low loss.

NO.51 Singlemode fiber has __________ bandwidth than multimode fiber.

NO.52 What is the maximum length of a permanently installed UTP cabling link allowed in structured cabling standards?

NO.53 In singlemode connectors, __________ is as important as low loss.

NO.54 Premise cables in LAN backbones may contain __________.

NO.55 Structured cabling standards call for a maximum length of UTP cable for data of __________.

NO.56 The diameter of an optical fiber is traditionally measured in __________.

NO.57 Ethernet was first developed as a ____ architecture using _____ cable with _______.

NO.58 To maintain rated performance, twists in each pair must be maintained to within _______ of the termination.

NO.59 Structured cabling standards call for a maximum length of singlemode fiber optic cable for backbones of
__________.

NO.60 Copper networks can be converted to fiber optics using __________.

NO.61 Which punchdown block is more often used with data (Cat 5e/6)?

NO.62 What is the core size of 1300 – 1550 nm singlemode fiber?

NO.63 Which two of the following components are included in a backbone distribution system (BDS)? (Choose two.)