[Q42-Q65] Verified NSE7_PBC-7.2 dumps Q&As – Pass Guarantee Exam Dumps Test Engine [2025]

Rate this post

Verified NSE7_PBC-7.2 dumps Q&As – Pass Guarantee Exam Dumps Test Engine [2025]

NSE7_PBC-7.2 dumps and 91 unique questions

Fortinet NSE7_PBC-7.2 exam is an excellent opportunity for IT professionals who want to enhance their career in cloud security. With the increasing adoption of public cloud environments, organizations are looking for skilled professionals who can secure their cloud infrastructure. Fortinet NSE 7 – Public Cloud Security 7.2 certification validates the candidate’s ability to secure public cloud environments using Fortinet products and solutions, which are widely used by organizations across various industries.

NO.42 A customer would like to use FortiGate fabric integration With FortiCNP When configuring a FortiGate VM to add to FortiCNP, which three mandatory configuration steps must you follow on FortiGate? (Choose three.)

Enable send logs-

Create and IPS sensor and a firewall policy

Create an IPsec tunnel.

Create an SSL]SSH inspection profile.

Enable two-factor authentication.

NO.43 Refer to the exhibit

An administrator is trying to deploy a FortiGate VM in Microsoft Azure using Terraform However, during the configuration, the Azure client secret is no longer visible in the Azure portal.
How would the administrator obtain the Azure
client secret to configure on Terratorm?

The administrator must create a new Azure account

The administrator can create a new client secret

The administrator must obtain the client secret through Azure Cloud Shell.

NO.44 Refer to the exhibit

Consider the active-active load balance sandwich scenario in Microsoft Azure.
What are two important facts in the active-active load balance sandwich scenario? (Choose two )

It uses the vdom-exception command to exclude the configuration from being synced

It is recommended to enable NAT on FortiGate policies.

It uses the FGCP protocol

It supports session synchronization for handling asynchronous traffic.

Explanation
B: It is recommended to enable NAT on FortiGate policies. This is because the Azure load balancer uses a hash-based algorithm to distribute traffic to the FortiGate instances, and it relies on the source and destination IP addresses and ports of the packets1. If NAT is not enabled, the source IP address of the packets will be the same as the load balancer’s frontend IP address, which will result in uneven distribution of traffic and possible asymmetric routing issues1. Therefore, it is recommended to enable NAT on the FortiGate policies to preserve the original source IP address of the packets and ensure optimal load balancing and routing1. D. It supports session synchronization for handling asynchronous traffic. This means that the FortiGate instances can synchronize their session tables with each other, so that they can handle traffic that does not follow the same path as the initial packet of a session2. For example, if a TCP SYN packet is sent to FortiGate A, but the TCP SYN-ACK packet is sent to FortiGate B, FortiGate B can forward the packet to FortiGate A by looking up the session table2. This feature allows the FortiGate instances to handle asymmetric traffic that may occur due to the Azure load balancer’s hash-based algorithm or other factors.
The other options are incorrect because:
It does not use the vdom-exception command to exclude the configuration from being synced. The vdom-exception command is used to exclude certain configuration settings from being synchronized between FortiGate devices in a cluster or a high availability group3. However, in this scenario, the FortiGate devices are not in a cluster or a high availability group, but they are standalone devices with standalone configuration synchronization enabled. This feature allows them to synchronize most of their configuration settings with each other, except for some settings that identify the FortiGate to the network, such as the hostname.
It does not use the FGCP protocol. FGCP stands for FortiGate Clustering Protocol, which is used to synchronize configuration and state information between FortiGate devices in a cluster or a high availability group. However, in this scenario, the FortiGate devices are not in a cluster or a high availability group, and they use standalone configuration synchronization instead of FGCP.

NO.45 What is the main advantage of using SD-WAN Transit Gateway Connect over traditional SD- WAN?

It eliminates the use of ECMP

You can use GRE-based tunnel attachments

You can combine it with IPsec to achieve higher bandwidth

You can use BGP over IPsec for maximum throughput

NO.46 An administrator decides to use the Use managed identity option on the FortiGate SDN connector with Microsoft Azure However, the SDN connector is failing on the connection What must the administrator do to correct this issue?

Make sure to add the Tenant ID on FortiGate side of the configuration

Make sure to set the type to system managed identity on FortiGate SDN connectorsettings

Make sure to enable the system assigned managed identity on Azure

Make sure to add the Client secret on FortiGate side of the configuration

NO.47 Your administrator instructed you to deploy an Azure vWAN solution to create a connection between the main company site and branch sites to the other company VNETs.
What are the two best connection solutions available between your company headquarters, branch sites, and the Azure vWAN hub? (Choose two.)

ExpressRoute

GRE tunnels

SSL VPN connections

An L2TP connection

VPN Gateway

The two best connection solutions available between your company headquarters, branch sites, and the Azure vWAN hub are A. ExpressRoute and E. VPN Gateway.
According to the Azure documentation for Virtual WAN, ExpressRoute and VPN Gateway are two of the supported connectivity options for connecting your on-premises sites and Azure virtual networks to the Azure vWAN hub1. These options provide secure, reliable, and high-performance connectivity for your network traffic.
ExpressRoute is a service that lets you create private connections between your on-premises sites and Azure.ExpressRoute connections do not go over the public internet, and offer more reliability, faster speeds, lower latencies, and higher security than typical connections over the internet2.
VPN Gateway is a service that lets you create encrypted connections between your on-premises sites and Azure over the internet using IPsec/IKE protocols.VPN Gateway also supports point-to-site VPN connections for individual clients using OpenVPN or IKEv2 protocols3.
The other options are incorrect because:
* GRE tunnels are not a supported connectivity option for Azure vWAN. GRE is a protocol that encapsulates packets for tunneling purposes.GRE tunnels are established between the connect attachment and your appliance in Azure vWAN4.
* SSL VPN connections are not a supported connectivity option for Azure vWAN. SSL VPN is a type of VPN that uses the Secure Sockets Layer (SSL) protocol to secure the connection between a client and a server.SSL VPN is not compatible with the Azure vWAN hub5.
* An L2TP connection is not a supported connectivity option for Azure vWAN. L2TP is a protocol that creates a tunnel between two endpoints at the data link layer (Layer 2) of the OSI model.L2TP is not compatible with the Azure vWAN hub.
1:Azure Virtual WAN Overview | Microsoft Learn2: [ExpressRoute overview – Azure ExpressRoute | Microsoft Docs]3: [VPN Gateway – Virtual Networks | Microsoft Azure]4: [Transit Gateway Connect – Amazon Virtual Private Cloud]5: [SSL VPN – Wikipedia] : [Layer 2 Tunneling Protocol – Wikipedia]

NO.48 Refer to Exhibit. You are troubleshooting a Microsoft Azure SDN connector issue on your FortiGate VM in Azure.

Which three settings should you check while troubleshooting this problem? (Choose three.)

Use the show vdom command to see hidden VDOMs.

use the diag sys va command.

Ensure FortiGate port4 can resolve DNS.

Ensure FortiGate port1 has internet access

Ensure IP address 169.254.169.254 is not blocked

NO.49 You are troubleshooting an Azure SDN connectivity issue with your FortiGate VM Which two queries does that SDN connector use to interact with the Azure management API? (Choose two.)

The first query is targeted to a special IP address to get a token.

The first query is targeted to IP address 8.8

There is only one query initiating from FortiGate port1 –

Some queries are made to manage public IP addresses.

NO.50 Refer to Exhibit. The exhibit shows the Connect Peers settings on Amazon Web Services (AWS) transit gateway attachments with two FortiGate VMS in a security VPC.

Which two statements are correct? (Choose two.)

The peer GRE address is the FortiGate external interface IP address.

The Transit Gateway GRE address is auto-generated

The BGP inside CIDR blocks can be any CIDR block with /29

The Peer GRE address is the FortiGate internal interface IP address

NO.51 What is the main advantage of using SD-WAN Transit Gateway Connect over traditional SD-WAN?

It eliminates the use of ECMP

You can use GRE-based tunnel attachments

You can combine it with IPsec to achieve higher bandwidth

You can use BGP over IPsec for maximum throughput

NO.52 Refer to the exhibit. An administrator deployed an HA active-active load balance sandwich in Microsoft Azure. The setup requires configuration synchronization between devices.

What are two outcomes from the configured settings? (Choose two.)

FortiGate-VM instances are scaled out automatically according to predefined workload levels.

FortiGate A and FortiGate B are two independent devices.

By default, FortiGate uses FGCP

It does not synchronize the FortiGate hostname

NO.53 Refer to the exhibit.

You have deployed a Linux EC2 instance in Amazon Web Services (AWS) with the settings shown on the exhibit What next step must the administrator take to access this instance from the internet?

Configure the user name and password.

Enable source and destination checks on the instance

Enable SSH and allocate it to the device

Allocate an Elastic IP address and assign it to the instance.

NO.54 You are adding more spoke VPCs to an existing hub and spoke topology Your goal is to finish this task in the minimum amount of time without making errors.
Which Amazon AWS services must you subscribe to accomplish your goal?

GuardDuty, CloudWatch

WAF, DynamoDB

Inspector, S3

CloudWatch, S3

NO.55 Refer to the exhibit. You are tasked with deploying a webserver and FortiGate VMS in AWS. You are using Terraform to automate the process.

Which two important details should you know about the Terraform files? (Choose two.)

All the output values are available after a successful terraform apply command

The subnet_private 1 value is defined in the variables . tf file

After the deployment, Terraform output values are visible only through AWS CloudShell.

You must specify all the AWS credentials in the output. of file.

NO.56 Refer to the exhibit. Your senior administrator successfully configured a FortiGate fabric connector with the Azure resource manager, and created a dynamic address object on the FortiGate VM to connect with a windows server in Microsoft Azure. However, there is now an error on the dynamic address object, and you must resolve the issue.

How do you resolve this issue?

Run diagnose debug application azd -l on FortiGate.

In the Microsoft Azure portal, set the correct tag values for the windows server.

In the Microsoft Azure portal, access the windows server, obtain the private IP address, and assign the IP address under the FortiGate-VM AzureLab address object.

Delete the address object and recreate a new address object with the type set to FQDN.

NO.57 Refer to the exhibit.

What value or values must the administrator use in the SSH Key section to deploy a FortiGate VM using Terraform in Amazon Web Services (AWS)?

Use the Name and ID values of the key pair

Use the Name of the key pair

Use the ID value of the key pair.

Use the Fingerprint value of the key pair

NO.58 Refer to the exhibit.

You deployed an HA active-active load balance sandwich with two FortiGate VMs in Microsoft Azure.
After the deployment, you prefer to use FGSP to synchronize sessions, and allow asymmetric return traffic In the environment, FortiGate port 1 and port 2 are facing external and internal load balancers respectively What IP address must you use in the peerip configuration?

The opposite FortiGate port 1 IP address.

The public load balancer port 2 IP address

The internal load balancer port 1 IP address.

The opposite FortiGate port 2 IP address.

NO.59 Refer to the exhibit. You are tasked to deploy a FortiGate VM with private and public subnets in Amazon Web Services (AWS).

You examined the variables.tf file.
What will be the final result after running the terraform init and terraform apply commands?

Terraform will not deploy a FortiGate VM

Terraform will deploy a FortiGate VM in the eu-West-Ia region with private and public subnets.

Terraform will deploy a FortiGate VM in the eu-West-1a region with two subnets and byol license.

Terraform will deploy a FortiGate VM in the eu-West-Ia region without any subnets.

NO.60 Refer to the exhibit. You deployed an HA active-active load balance sandwich with two FortiGate VMs in Microsoft Azure. After the deployment, you prefer to use FGSP to synchronize sessions, and allow asymmetric return traffic In the environment, FortiGate port 1 and port 2 are facing external and internal load balancers respectively What IP address must you use in the peerip configuration?

The opposite FortiGate port 1 IP address.

The public load balancer port 2 IP address

The internal load balancer port 1 IP address.

The opposite FortiGate port 2 IP address.

NO.61 Refer to the exhibit. You are deploying a FortiGate-VM in Microsoft Azure using the PAYG/On- demand licensing model. After you configure the FortiGate-VM, the validation process fails, displaying the error shown in the exhibit.

What caused the validation process to fail?

You selected the incorrect resource group.

You selected the Bring Your Own License (BYOL) licensing mode.

You selected the PAYG/On-demand licensing model, but did not select correct virtual machine size.

You selected the PAYG/On-demand licensing model, but did not associate a valid Azure subscription.

NO.62 What is the main advantage of using SD-WAN Transit Gateway Connect over traditional SD-WAN?

It eliminates the use of ECMP

You can use GRE-based tunnel attachments

You can combine it with IPsec to achieve higher bandwidth

You can use BGP over IPsec for maximum throughput

NO.63 What are two main features in Amazon Web Services (AWS) network access control lists (ACLs)? (Choose two.)

You cannot use Network ACL and Security Group at the same time.

The default network ACL is configured to allow all traffic

NetworkACLs are stateless, and inbound and outbound rules are used for traffic filtering

Network ACLs are tied to an instance

NO.64 You have created a TGW route table to route traffic from your spoke VPC to the security VPC where two FortiGate devices are inspecting traffic. Your spoke VPC CIDR block is already propagated to the Transit Gateway (TGW) route table.
Which type of attachment should you use to advertise routes through BGP from the spoke VPC to the security VPC?

Connect attachment

VPC attachment

Route attachment

GRE attachment

NO.65 Customer XYZ has an ExpressRoute connection from Microsoft Azure to a data center. They want to secure communication over ExpressRoute, and to install an in-line FortiGate to perform intrusion prevention system (IPS) and antivirus scanning.
Which three methods can the customer use to ensure that all traffic from the data center is sent through FortiGate over ExpressRoute? (Choose three.)

Install FortiGate in Azure and build a VPN tunnel to the data center over ExpressRoute

Configure a user-defined route table

Enable the redirect option in ExpressRoute to send data center traffic to a user-defined route table

Configure the gateway subnet as the subnet in the user-defined route table

Define a default route where the next hop IP is the FortiGate WAN interface

Fortinet NSE 7 – Public Cloud Security 7.2 exam covers a wide range of topics, including cloud security architecture, cloud security operations, and cloud security services. NSE7_PBC-7.2 exam is designed to test the candidate’s ability to deploy, manage, and secure public cloud infrastructures using Fortinet’s cloud security solutions. It is a comprehensive exam that requires a deep understanding of the latest cloud security concepts, trends, and best practices.

NSE7_PBC-7.2 Dumps for Pass Guaranteed – Pass NSE7_PBC-7.2 Exam: https://www.braindumpsit.com/NSE7_PBC-7.2_real-exam.html