NEW QUESTION 84
What competence, among others, should each audit team member have?

NEW QUESTION 85
Among others, what does Clause 4.4 (Quality Management System and Its Processes) of ISO 9001 require from organizations?

NEW QUESTION 86
You work for an organisation, ‘ABC’, which provides packaged food to the public. You are asked to lead a team (you as the leader and two other auditors) to audit an external provider, ‘XYZ’, which provides packaging materials to your organisation. It is 4 pm, and the audit is dlose to an end; you are having an internal meeting with the team to decide what will be presented to the auditee during the Closing meeting. The Closing meeting was scheduled for 5 pm.
‘XYZ’ has two manufacturing lines: M1 is a clean room for primary packaging materials (i.e. will be in direct contact with the food), and M2 is for secondary materials (i.e. will not be in direct contact with food).
Auditor 1 audited the two manufacturing lines.
You: “What findings would you report?”
Auditor 1: “I have one issue. Earlier today in the morning I saw some secondary material stocked in the clean room. I would propose raising a nonconformity.” You: “How would you write the nonconformity?” Auditor 1: “In the clean room, there was a pallet with secondary materials.” What additional information would you add to this text to complete the nonconformity report? Select six.

NEW QUESTION 87
You are conducting an ISO 9001 audit of a Materials Recycling Facility (MRF). The organisation processes waste plastics into raw materials for plastic bottle manufacturers. You reach the manual picking line where operators are removing contaminant materials from incoming products, such as plastic bags, plastic film and badly contaminated items that would compromise the recycling process. You interview the line supervisor.
You: “Why are these plastic items being rejected at this stage?”
Auditee: “They do not meet our processing standards.”
You: “What is the reason for that?”
Auditee: “These items are likely to damage the machinery down the line. They can also compromise our quality standards. We need to protect our reputation for good quality output materials.” You: “What happens to the rejected items?” Auditee: “Some get melted down in another process later on and some are disposed of as waste products that cannot be recycled.” You: “What happens to the waste products?” Auditee: “I’m not sure. I suppose they go to landfill.” Which two. of the following actions would you take to investigate further?

NEW QUESTION 88
Consultancy ABC, which is a subsidiary of a certification body called ABC-CERT, provided consultancy services regarding the implementation of a QMS based on ISO 9001 to an organization.
Considering this, can ABC-CERT provide certification services to the organization which obtained consultancy services from Consultancy ABC?

NEW QUESTION 89
What must the auditor consider in order to mitigate audit risks and obtain reasonable assurance?

NEW QUESTION 90
Scenario 3:
Fin-Pro is a financial institution in Austria offering commercial banking, wealth management, and investment services. The company faced a significant loss of customers due to failing to improve service quality as they expanded.
To regain customer confidence, top management implemented a QMS based on ISO 9001. After a year, they contacted ACB, a local certification body, to pursue ISO 9001 certification.
The audit team was led by Emilia, an experienced lead auditor, and included three auditors. After an agreement was reached, ACB sent the audit objectives to the audit team.
The audit team began by gathering information about Fin-Pro’s understanding of ISO 9001 requirements.
While reviewing documented information, they noticed missing records of training and awareness sessions. They conducted employee interviews to verify attendance.
The team also reviewed the organizational chart and job descriptions to confirm employee competence.
They observed the company’s working environment (social, psychological, and physical conditions).
The audit team analyzed the evidence and prepared an audit report with findings and conclusions.
What type of evidence has been collected by the ACB’s audit team, as presented in scenario 3?

NEW QUESTION 91
Whistlekleen is a national dry cleaning and laundry company with 50 shops. You are conducting a surveillance audit of the Head Office and are sampling customer complaints. You find that 80% of complaints originate from five shops in the same region. Most of these complaints relate to damage to customer laundry. The Quality Manager tells you that these are the oldest shops in the company. The cleaning equipment needs replacing but the company cannot afford it at the moment. You learn that the shop managers were told to dismiss most of the claims on the basis of the poor quality of the laundered materials.
On raising the matter with senior management, you are told that there are plans to replace the equipment in these shops over the next five years.

NEW QUESTION 92
You, as auditor, are in dialogue with the quality lead and managing director of a small business that supplies specialist laboratory equipment and furniture.
You: “I’d like to look at how you manage change in the organisation. What changes have you made as a business, say, over the last 12 months?” Auditee: “We have made some strategic changes, the main one being that we no longer manufacture our own products in house.” You: “That sounds like quite a significant change. What has been the impact of that?” Auditee: “We now mainly sell other manufacturers’ products, under their brand names, and have outsourced manufacture of our own brand products to one of our suppliers. Unfortunately, we had to make six members of our staff redundant. This represents about 20% of our workforce, so this has been quite a challenging time.” This scenario presents a number of audit trails to different ISO 9001 requirements.
Which three of the following requirements would be relevant audit trails for this scenario?

NEW QUESTION 93
During a second-party audit, the auditor examines the records that are available for the external provider, ABC Forgings, to whom manufacturing has recently been outsourced.
There are standard external provider checklists for three competitors for the contract and there are inspection records from the trial manufacturing batches produced by ABC Forgings. There is no documented evidence of the criteria used to confirm the appointment of ABC Forgings, and no contract or terms and conditions.
Ongoing monitoring indicates that external provider performance is satisfactory, but no documented information has been retained.
Select two options for the evidence which demonstrates a nonconformity with clause 8.4 of ISO 9001.

NEW QUESTION 94
XYZ Corporation is an organisation that employs 100 people. As audit team leader, you are conducting a certification audit at Stage 1. When reviewing the quality management system (QMS) documentation, you find that quality objectives have been set for every employee in the organisation except top management.
The Quality Manager complains that this has created a lot of resistance to the QMS, and the Chief Executive is asking questions about how much it will cost. He asks for your opinion on whether this is the correct method of setting objectives.
Three months after Stage 1, you return to XYZ Corporation to conduct a Stage 2 certification audit as Audit Team Leader with one other auditor. You find that the Quality Manager has cancelled the previous quality objectives for all employees and replaced them with a single objective for himself. This states that “The Quality Manager will drive multiple improvements in the QMS in the next year”. The Quality Manager indicates that this gives him the authority to issue instructions to department managers when quality improvement is needed. He says that this approach has the full backing of senior management. He shows you the latest Quality Improvement Request that was included in the last management review.

After further auditing, the issues below were found. Select two statements that apply to the term
`nonconformity’.

NEW QUESTION 95
Which two of the following may be changed once a Stage 2 certification audit has commenced?

NEW QUESTION 96
You, as auditor, are in dialogue with the quality lead and managing director of a small business that supplies specialist laboratory equipment and furniture.
You: “I’d like to look at how you manage change in the organisation. What changes have you made as a business, say, over the last 12 months?” Auditee: “We have made some strategic changes, the main one being that we no longer manufacture our own products in house.” You: “That sounds like quite a significant change. What has been the impact of that?” Auditee: “We now mainly sell other manufacturers’ products, under their brand names, and have outsourced manufacture of our own brand products to one of our suppliers. Unfortunately, we had to make six members of our staff redundant. This represents about 20% of our workforce, so this has been quite a challenging time.” You: “I’m sure. What were the reasons for making the change?” Auditee: “Our manufacturing section was a small operation, and we struggled to cope with fluctuations in demand. During busy periods, we found it hard to meet lead times, and in quiet periods we had staff with little to do. This was having an impact on customer satisfaction and meant we had to charge premium prices that made our product uncompetitive.” You: “How did you go about the change?” The auditor asks to speak to the purchasing manager about the selection of the subcontractor to manufacture the company’s own brand products.
You: “How did you choose a supplier to manufacture your products?”
Auditee: “We have had a long-term relationship with a supplier ABC Ltd – we gave them our design drawings, got them to complete a supplier questionnaire and run a couple of trial batches for us. We were happy with the result and we have used them ever since.” ISO 9001:2015, clause 8.4.1 outlines situations when controls need to be applied to externally provided processes, products and services. Which one of the following situations is applicable to this scenario?

NEW QUESTION 97
Which type of audit risk is the risk that a significant defect may occur in the QMS, although the organization has internal control mechanisms in place?

NEW QUESTION 98
Match the process descriptions below to the process names:

NEW QUESTION 99
Which of the following three options could be considered potential threats to impartiality in an audit context?

NEW QUESTION 100
Scenario 5: Mechanical-Electro (ME) Audit Stages
Mechanical-Electro, better known as ME, is an American company that provides mechanical and electrical services in China. Their services range from air-conditioning systems, ventilation systems, plumbing, to installation of electrical equipment in automobile plants, electronic manufacturing facilities, and food processing plants.
Due to the fierce competition from local Chinese companies and failing to meet customer requirements, ME’s revenue dropped significantly. In addition, customers’ trust and confidence in the company decreased, and the reputation of the company was damaged.
In light of these developments, the top management of ME decided to implement a quality management system (QMS) based on ISO 9001. After having an effective QMS in place for over a year, they applied for a certification audit.
A team of four auditors was appointed for the audit, including Li Na as the audit team leader. Initially, the audit team conducted a general review of ME’s documents, including the quality policy, operational procedures, inventory lists, QMS scope, process documentation, training records, and previous audit reports.
Li Na stated that this would allow the team to maintain a systematic and structured approach to gathering documents for all audit stages. While reviewing the documented information, the team observed some minor issues but did not identify any major nonconformities. Therefore, Li Na claimed that it was not necessary to prepare a report or conduct a meeting with ME’s representatives at that stage of the audit. She stated that all areas of concern would be discussed in the next phase of the audit.
Following the on-site activities and the opening meeting with ME’s top management, the audit team structured an audit test plan to verify whether ME’s QMS conformed to Clause 8.2.1 (Customer Communication) of ISO 9001.
To do so, they gathered information through group interviews and sampling. Li Na conducted interviews with departmental managers in the first group and then with top management. In addition, she chose a sampling method that sufficiently represented customer complaints from both areas of ME’ s operations.
The team members were responsible for the sampling procedure. They selected a sample size of 4 out of
45 customer complaints received weekly for electrical services and 2 out of 10 complaints for mechanical services.
Afterward, the audit team evaluated the evidence against the audit criteria and generated the audit findings.
According to general principles of sampling procedure, did the audit team select a valid sample for electrical services?

NEW QUESTION 101
A person who provides specific knowledge or expertise to the audit team during the audit is known as a
/an:

NEW QUESTION 102
You are the supervisor in Production of a medium size manufacturing organisation. You are qualified as an internal auditor. The Quality Manager asks you to lead the next internal audit of Production and Logistics Dispatch. The audit team includes two other internal auditors.

NEW QUESTION 103
Which of the following is a responsibility of a guide in an audit?

NEW QUESTION 104
What are the criteria for reviewing documented information?